Table of Contents
Advertisement
5.
Insert the socket in the assembly.
Turn it clockwise to lock it in place.
6.
Reinstall the side marker assem-
bly in the bumper. Tighten the
mounting screw securely.
Replacing a High-mount Brake
Light Bulb
1.
Open the trunk and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
2.
Remove the burned-out bulb by
pulling it straight out of the socket.
Install the new bulb in the socket.
3.
Reinstall the socket. Turn it
clockwise until it locks.
4.
Test the lights to make sure the
new bulb is working.
Maintenance
Lights
297
Advertisement
Table of Contents
