Toyota 2005 Tundra Owner's Manual page 173

2. Fix the child restraint system with
the seat belt.
Latch the hook onto the anchorages
and tighten the top strap.
For instructions to install the child re-
straint system, see "Child restraint" in this
Section.
CAUTION
Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.
'05 TUNDRA_U (L/O 0408)
3. Replace the head restraint.
—Installation with child
restraint lower anchorages
(standard cab models)
Lower anchorages for the child restraint
systems complying with the FMVSS225
or CMVSS210.2 specifications
installed in the front seat.
The anchorages are installed in the gap
between the seat cushion and seatback of
the right side of the seat as shown in the
illustration.
Child restraint systems complying with the
FMVSS213 or CMVSS213 specification
can be fixed to these anchorages. In this
case, it is not necessary to fix the child
restraint system with a seat belt on the
vehicle.
2005 TUNDRA from Aug. '04 Prod. (OM34427U)
are
137