Table of Contents
Advertisement
Quick Links
X5368r-P3 User's Manual
Version 1.0
X5368r-P3 User's Manual
Version 1.0
XAVi Technologies Corporation
Tel: +886-2-2995-7953
Fax: +886-2-29957954
9F, No. 129, Hsing Te Road, Sanchung City,
Taipei County 241,
Taiwan
Copyright © 2005, XAVi Technologies Corporation
Information in this manual is subject to change without notice. No part of this manual
may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying or scanning, for any purpose, without the written
permission of XAVi Technologies Corporation.
XAVi Technologies Corporation provides this documentation without warranty of any
kind, implied or expressed, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose.
i
ii
Advertisement
Table of Contents
Summary of Contents for XAVI Technologies Corp. X5368r-P3
- Page 1 X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 XAVi Technologies Corporation Tel: +886-2-2995-7953 Fax: +886-2-29957954 9F, No. 129, Hsing Te Road, Sanchung City, Taipei County 241, Taiwan Copyright © 2005, XAVi Technologies Corporation Information in this manual is subject to change without notice. No part of this manual...
-
Page 2: Table Of Contents
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 5.4.5 IPoA Routed……………………………………….32 – – 5.4.6 PPPoE Routed…………………………………… 33 5.4.7 Ethernet Routed………………………………… 35 Overview…………………………………….………….……….…….… 1 5.4.8 Ethernet Bridged………………………………… 36 Features…………………………………………………………..……... 2 5.4.9 PPPoE Bridge Routed……………………………37 III. Packaging……………………………………….…….………………… 3 Security………………………………………………….… 39 Safety Guidelines………………………………………………………. - Page 3 X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.12 VoIp set endpoint adminstate………………………… – – … 7.13 VoIP set endpoint codecs…………………………… …… Basic……………. ……….…………………………………….……..…135 7.14 VoIP set endpoint displayname……………………… … Intercom Test …………… ..….…………………………….………… 136 7.15 VoIP set endpoint epname……………………………...
-
Page 4: Overview
By offering the flexibility to service provider with one Support Networking protocols such as PPP, NAT, Routing, model that fits different kind of ADSL applications, the X5368r-P3 DHCP server/relay/client offers the convenience, efficiency and innovation of copper wire to its Support local and remote management through Web/HTTP, customers. -
Page 5: Packaging
Carefully follow the instructions in this manual; also follow all instruction labels on this device. X5368r-P3 ADSL VoIP IAD device unit Except for the power adapter supplied, this device should not be connected to any other adapters. -
Page 6: Appearance
3 4 5 X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 Appearance Front Panel Rear Panel 1 2 3 4 5 Label Color Description Label Description Status On/Off Power Supply ready Green Power supply is connected. Power jack; connect to a power adapter. -
Page 7: Hardware Installation
Step 2: Use a RJ-45 cable to connect one end to an Ethernet port local Ethernet IP address is “192.168.1.1”. See Chapter 2, of X5368r-P3 and the other end to the LAN or a PC with an Command Line Interface, for more details. -
Page 8: Default Values
Step 1: Extract the ZIP file for updated firmware. Ethernet (local) IP: 192.168.1.1 Local Line Code: Multi Mode Step 2: Connect X5368r-P3 via the local Ethernet port or remote Subnet mask: 255.255.255.0 DHCP Server: Disable ADSL link, making sure that the X5368r-P3 Ethernet IP... -
Page 9: Overview
Software Upgrade through a Web-browser Chapter 2 Step 1: Extract the ZIP file for updated firmware. Step 2: Connect X5368r-P3 via the local Ethernet port or remote Web Management Interface ADSL link, making sure that the X5368r-P3 Ethernet IP address and your terminal are properly configured so that you can successfully “ping”... -
Page 10: Login
You can also edit the username and password or add a new profile (see section 4.3 Management for further details). The Status page displays the current configuration of X5368r-P3. You can click on the shortcuts from the Status page for quickly editing most frequent configurations. -
Page 11: Quick Start
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 3. Quick Start To display the Quick Start screen click on Quick Status on the menu in the top-left of the screen. Click WAN Settings… to edit/add WAN connections refer to section 5.3 WAN Connections for further details. -
Page 12: System
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 4. System To display the Quick Start screen click on Quick Status on the menu in the top-left of the screen. 4.1 Event Log Click on the Event Log link in the navigation bar to view the all the events from this device. -
Page 13: One-Click Update
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 4.2 One-Click Update 4.4 Firmware Update Click on the One-Click Upgrade link on the navigation bar to This function provides you to update the firmware manually. Click update the system software to your device. Click the OK button,... -
Page 14: Backup/Restore
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 4.5 Backup/Restore Configuration 4.6 Restart Router Click on the Backup/Restore link in the navigation bar to view To restart the device, click on the Restart button. You may also check the box, if you would like to restart the modem with the factory the Backup/Restore interface. -
Page 15: Configuration
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 5. Configuration 5.1 Save Config Click on the Save Config link in the navigation bar to view the To access the configuration menu, click on Configuration on the menu at the top-left of the screen. -
Page 16: Lan Connections
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 Create a new service: Click the Create a new service button to 5.3 LAN Connections create Ethernet routed or Ethernet bridged service. Define current LAN services. Change Default LAN IP Address: The default LAN IP interface is iplan, which is shown in the table above. -
Page 17: Wan Connections
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 5.4.1 RFC 1483 Routed 5.4 WAN Connections Click Create a new service to display the type of service. The page lists WAN connection protocols that are available on Select RFC 1483 routed and then click on the Configure this device. -
Page 18: Rfc 1483 Bridged
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 5.4.2 RFC 1483 Bridged 5.4.3 PPPoA Routed Click Create a new service to display the type of service. Click Create a new service to display the type of service. Select RFC 1483 bridged and then click on the Configure Select PPPoA routed and then click on the Configure button. -
Page 19: Pppoa Bridged
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 5.4.4 PPPoA Bridged 5.4.5 IPoA Routed Click Create a new service to display the type of service. Click Create a new service to display the type of service. Select PPPoA Bridged and then click on the Configure button. -
Page 20: Pppoe Routed
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 5.4.6 PPPoE Routed Click Create a new service to display the type of service. Type PPPoE router for the description. Select PPPoE routed and then click on the Configure button. -
Page 21: Ethernet Routed
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 5.4.7 Ethernet Routed 5.4.8 Ethernet Bridged This service is for Ethernet Routed on the wan port. This service is for Ethernet bridged on the wan port. Click Create a new service to display the type of service. - Page 22 X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 5.4.9 PPPoE over Ethernet/Bridge Routed Type a description. Define the VPI, VCI value to match the DSLAM/ISP setting. This service is for Ethernet Bridge/Routed on the wan port. Set PPPoE Auto Connect to Enabled.
-
Page 23: Security
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 Once again, click on the Add Interface button to add an 5.5 Security external interface. Click on the Security link on the Configuration menu. In this Select an interface name (ipwan) and interface type (external), section, you will be able to configure the Security Interface. - Page 24 X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 Security Policy Configuration Security Trigger Configuration Scroll down and click on the Security Policy Configuration link Return to the Interface List and click on the Security Trigger under the Policies, Triggers and Intrusion Detection section.
- Page 25 X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 By default security logging is enabled. Click on the Disable Security Logging button to disable the logging feature. Click on the Apply button once you have set/changed these You may also disable security logging individually by clicking on values.
- Page 26 X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 5.6 802.1x Advanced attributes Click on the 802.1x link in the Configuration menu. This page setup Key Transmission Enabled: If set to True then key of an 802.1x authenticator for wireless access.
-
Page 27: Search For Service
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 5.7 Search for service 5.8 WPA Click on the Search for service link in the Configuration menu. This Click on the Search for service link in the Configuration menu. This enables the device to search for PVCs. -
Page 28: Ip Routes
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 5.10 DHCP Server 5.9 IP Routes This device can be setup to perform the service of the DHCP Click on the IP Routes link in the Configuration menu. This Server and enables the data connection between multiple PCs page displays a table of the defined routes. - Page 29 X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 DNS server option information Subnet Values Define your new DHCP subnet here. If you do not wish to specify the Enter the addresses of Primary and Secondary DNS servers to be subnet value and subnet mask by hand, you may instead select an provided to DHCP clients on this subnet.
- Page 30 X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 appropriately. Use local host address as default gateway: Select true or Define your new DHCP fixed host here. The IP address you choose false from the drop-down list. If enabled, then the local IP will be given to the host with the MAC address you specify.
-
Page 31: Dns Client
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 5.11 DNS Client Define your new DHCP fixed host here. The IP address you choose Click on the DNS Client link on the navigation bar. This section will be given to the host with the MAC address you specify. The IP... -
Page 32: Dns Relay
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 5.12 DNS Relay 5.13 VoIP Click on the DNS Relay link in the navigation bar. You may 5.13.1 VOIP Configuration enable or disable DNS Relay. VoIP Functionailty: Set to Enabled to use this function... -
Page 33: Sip Settings
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 5.13.2 SIP Settings SIP Registrar/Proxy: This command is used to identify the IP domain for the SIP Proxy server. SIP Registrar/Proxy Port: This command is used to identify the port used by SIP agents to communicate with the SIP Proxy server. -
Page 34: Dialing Plan
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 5.13.3 Dialing Plan 5.13.4 MGCP Settings SIP Calling Digitmap: This command enables you to configure Displays current MGCP settings, click Modify MGCP ‘VoIP with PSTN switching’ on your system. Using this CallAgents...To make changes to the call agents. -
Page 35: Qos Settings
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 Call Agents 5.13.5 QoS Settings The parameters below can be used to maintain QOS. Enter the IP address or the Domain for the call agent and click Add. DiffServ DSCP (SIP): Enter a value... -
Page 36: Endpoints
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 Edit endpoints 5.13.6 Endpoints Displays information about the endpoints, including the available To change the Endpoint name, use the command voip set endpoint codecs. Clcik on Edit VoIP Endpoints or Edit SpeedDials to access epname these screen. -
Page 37: Sntp Client
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 5.14 SNTP Client Speed-dial Settings Click on the SNTP Client link on the navigation bar. NTP (Network This command displays all the speed dials which you have setup for Time Protocol) is used to synchronize the real time clock of a... -
Page 38: Radius Client
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 5.15 RADIUS Client Click on the RADIUS Client link on the navigation bar. In this section you can view and RADIUS servers which are used for client authentication and accounting. - Page 39 X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 Authentication Servers This page displays the list of RADIUS Authentication Servers. Server Name: Enter a name for the Authentication Server. Server IP Address: Enter the IP address of the Authentication Server.
-
Page 40: Bridge
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 5.16 Bridge Server Name: Enter a name for the Accounting Server. Server IP Address: Enter the IP address of the Accounting To configure the bridge click on Bridge in the configuration menu. -
Page 41: Ports
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 Ports Interface configuration. Select the Filer Type as All, IP or PPPoE, enter a value To configure ports, click on Ports on the menu. for Add port to Filter mask, and check wlan_filtered if required. -
Page 42: Voipfxs
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 6.2 VoIPcmdstat Configuration 6.1 VoIPfxs Configuration Click on the Voipfxs0 on the navigation bar. This page displays Click on the Voipcmdstat on the navigation bar. This page the basic port attributes. If you need further function, you may displays the basic port attributes. -
Page 43: Adsl
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 ADSL Raw Ethernet Click on the A1 link on the navigation bar. This page displays a table Click on the Raw Ethernet link on the navigation bar. This page of the default ADSL settings. This includes standard, trellis coding, displays the Ethernet port configuration. -
Page 44: Wireless
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 Wireless Click on the wireless link on the navigation bar. This page displays the Ethernet port configuration. See Section 8 for further details about the wireless parameters. -
Page 45: Ethernet
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 6.7 WLAN-flitered 6.6 Ethernet From the basic screen, the Wireless port can be reset to default. For From the basic screen, the Ethernet port can be reset to default. For advanced functions click on View advanced attributes. -
Page 46: Voip Cli
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.1 VoIP add callagent 7.2 VoIP clear callagents 7.1.1 Syntax 7.2.1 Syntax voip add callagent <name> <domain> [port <port>] [vendor <vendor>] voip clear callagents Description 7.2.2 Description This command is used to configure MGCP on a Voice-IAD system. -
Page 47: Voip Delete Callagent
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.3 VoIP delete callagent 7.4 VoIP list callagents 7.3.1 Syntax 7.4.1 Syntax voip list callagents voip delete callagent <name> 7.4.2 Description 7.3.2 Description This command lists information about the MGCP call... -
Page 48: Voip Add Demdial
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.5 VoIP add dcmdial 7.5.4 Example For example, the following command: 7.5.1 Syntax prompt> voip add dcmdial 9 3 dial_no_prefix voip add dcmdial <prefix> <numdigits> means that if the User dials 9102, the number 102 is <dial_at_timeout|dial_no_prefix|dial_with_prefix>... -
Page 49: Voip Clear Dcmdials
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.6 VoIP clear dcmdials 7.7 VoIP delete dcmdial 7.6.1 Syntax 7.7.1 Syntax voip clear dcmdials voip delete dcmdial <number> 7.6.2 Description 7.7.2 Description This command clears all dial plans, which have been set This command deletes a specific dial plan which has been up on the Voice-IAD system. -
Page 50: Voip List Dcmdials
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.8 VoIP list dcmdials 7.9 VoIP endpoint list speeddials 7.8.1 Syntax 7.9.1 Syntax voip list dcmdials voip endpoint <index> list speeddials 7.8.2 Description 7.9.2 Description This command lists all the dial plans which have This command displays all the speed dials which you been setup on the Voice-IAD system. -
Page 51: Voip Endpoint Set Speeddial
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.10 VoIP endpoint set speeddial 7.10.4 Example 7.10.1 Syntax prompt> voip endpoint 1 set speeddial 7 01223012345 voip endpoint <index> set speeddial <name> <dialstring> Once this command has been entered, then entering 7# 7.10.2... -
Page 52: Voip List Endpoints
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.11 VoIP list endpoints 7.12 VoIP set endpoint adminstate 7.11.1 Syntax 7.12.1 Syntax voip list endpoints voip set endpoint <index> adminstate <inservice | oos> 7.11.2 Description 7.12.2 Description This command lists information about the endpoints which... -
Page 53: Voip Set Endpoint Codecs
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.13 VoIP set endpoint codecs Table 8: VoIP set endpoint codecs CLI command 7.13.1 Syntax voip set endpoint <index> codecs <codecs> 7.13.2 Description This command specifies the codec types which can be used to compress the Voice packets from the endpoint specified. -
Page 54: Voip Set Endpoint Displayname
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.14 VoIP set endpoint displayname 7.15 VoIP set endpoint epname 7.14.1 Syntax 7.15.1 Syntax voip set endpoint <index> displayname <name> voip set endpoint <index> epname <epname> 7.14.2 Description 7.15.2 Description This command sets a name to be associated with an This command is used to configure endpoints. -
Page 55: Voip Set Endpoint Password
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.16 VoIP set endpoint password 7.17 VoIP set interfacename 7.16.1 Syntax 7.17.1 Syntax voip set endpoint <index> password <password> voip set interfacename <name> 7.16.2 Description 7.17.2 Description This command sets a password to be associated with an This command is used to set the interface name that will endpoint. -
Page 56: Voip Set Mgcp Domain
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.18 VoIP set mgcp domain 7.19 VoIP set mgcp eptypename 7.13.19.1 Syntax 7.19.1 Syntax voip set mgcp domain <domain> voip set mgcp eptypename <eptypename> 7.13.19.2 Description 7.19.2 Description This command is used to identify the MGCP domain in This command is used to configure the MGCP Endpoint which the Voice-IAD system is situated. -
Page 57: Voip Set Protocol
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.20.4 Example 7.20 VoIP set protocol prompt> voip set protocol mgcp 7.20.1 Syntax After you have entered this command, you must save the voip set protocol <sip | mgcp | none>... -
Page 58: Voip Set Region
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.21 VoIP set region 7.22 VoIP set rtpdscp 7.21.1 Syntax 7.22.1 Syntax voip set region <china | japan | uk | us> voip set rtpdscp <dscp> 7.21.2 Description 7.22.2 Description... -
Page 59: Voip Set Sigdscp
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.23 VoIP set sigdscp 7.22.4 Example prompt> voip set rtpdscp 010000 7.23.1 Syntax voip set sigdscp <dscp> 7.23.2 Description This command is used to set QoS characteristics for signalling packets. It sets the DSCP (Differentiated Services Code Point) in the IP header. -
Page 60: Voip Set Sip Digitmap
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.24 VoIP set sip digitmap 7.23.4 Example prompt> voip set sigdscp 001000 7.24.1 Syntax voip set sip digitmap <digitmap> Description This command specifies a digit map to be used for all SIP-based VoIP calls. -
Page 61: Voip Set Sip Echocancel
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.25 VoIP set sip echocancel Table 10-19:voip set sip digitmap CLI command 7.25.1 Syntax voip set sip echocancel {enabled|disabled} 7.25.2 Description 7.24.2 Example This command enables or disables Echo Cancelling on the Voice-IAD System. -
Page 62: Voip Set Sip Packetperiod
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.26 VoIP set sip packetperiod 7.27 VoIP set sip proxyroute 7.26.1 Syntax 7.27.1 Syntax voip set sip packetperiod <period> voip set sip proxyroute {loose|strict} Description Description This command sets the length of the Voice sample (in ms) which is put in a packet. -
Page 63: Voip Set Sip Regexpires
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.28 VoIP set sip regexpires 7.29 VoIP set sip regproxy 7.28.1 Syntax 7.29.1 Syntax voip set sip regexpires <seconds> voip set sip regproxy <domain> Description 7.29.2 Description This command is used to identify the IP domain for the This command specifies the time interval after which SIP Proxy server. -
Page 64: Voip Set Sip Regport
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.30 VoIP set sip regport 7.31 VoIP set sip sendtransport 7.30.1 Syntax 7.31.1 Syntax voip set sip regport <port> voip set sip sendtransport <tcp | udp> 7.30.2 Description 7.31.2 Description... -
Page 65: Voip Set Sip Silencesuppression
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.32 VoIP set sip silenceSuppression 7.33 VoIP set sip userdomain 7.32.1 Syntax 7.33.1 Syntax voip set sip silenceSuppression {enabled|disabled} voip set sip userdomain <domain> 7.32.2 Description 7.33.2 Description This command is used to set the SIP user domain. The This command enables or disables Silence Suppression. -
Page 66: Voip Set Tcpport
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.34 VoIP set tcpPort 7.35 VoIP set udpPort 7.34.1 Syntax 7.35.1 Syntax voip set tcpPort <portno> voip set udpPort <portno> 7.34.2 Description 7.35.2 Description This command is used to configure the TCP port number This command is used to configure the UDP port number for use by SIP. -
Page 67: Voip Show
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 7.36 VoIP show Wireless Interface Click on the wireless link on the Port menu in the navigation bar. 7.36.1 Syntax This page displays the Ethernet port configuration. Click on View voip show Advanced Attributes to access this page. - Page 68 X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 Authentication Select from: Open/ Shared/WPA-PSK/WPA-EAP. Open Permits any client to use the AP as long as they know the Passphrase. Shared: Uses the WEP key as shared-key to be exchanged between the client and the AP as a simple form of authentication.
- Page 69 X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 Auto Channel If True is selected the device can auto select This value must match client adapters. channels Hide SSID Used to kep private the SSID Collect Stats True allows statistics to be collected...
- Page 70 X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 Nitro Displays status of this function. Nitro rate XMCompression establishes a peer to peer link between clients when transferring data. Wep Encryption Select the level of encryption Nitro True enables this function...
-
Page 71: Intercom Test
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 – – A2. Intercom Test: A1. Basic Connection: Connection: VoIP set endpoint 1 epname 0001 # Set FXS1 phone number to 0001 & & VoIP set endpoint 2 epname 0002 # Set FXS2 phone number to 0002 VoIP set SIP regproxy 192.168.1.1... -
Page 72: A3. Peer To Peer
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 A3. Peer to Peer: A4. Via proxy sever non-authentication: Connection: Connection: IAD2 Setting: IAD2 Setting: VoIP set endpoint 1 epname 0003 VoIP set endpoint 1 epname 0001 VoIP set endpoint 1 epname 0003... - Page 73 X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 A5. Via proxy sever with authentication: A6. PSTN Out going call: Connection: Connection: IAD2 Setting: VoIP set endpoint 1 epname 0003 VoIP set endpoint 1 epname 0001 1. Pick up Telephone 1 or 2 handset...
- Page 74 X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 A7. PSTN Incoming call: A8. IAD VoIP All Setting: Connection: VoIP set region US # China, US, UK, Japan, Sweden VoIP set protocol SIP # None, MGCP, SIP VoIP set SIP echo cancel enabled # enabled, disabled VoIP set regexpires 3600 # set register expire time, unit: sec.
-
Page 75: Pre-Requisites
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 – – B1 Pre-requisites The procedure described in this section assumes the following: • You are using a computer, which contains a clean installation of any of the following Windows platforms (all of the platforms listed below support a PC-attached Gateway configuration): •... -
Page 76: P P E N D I X C - S P E C I F I C A T I O N S
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 – – Click on Accept to accept the license agreement. C1. Hardware Specifications The following window is displayed asking you for information about Local Interface how the PC is physically connected to the DSL Modem: •... -
Page 77: C2. Software Specifications
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 C3. VoIP Specifications C2. Software Specifications Networking and Protocols Support Supports for SIP • Transparent Bridging (IEEE 802.1D) Supports for the Real Time transport Protocol (RTP)-RFC1889 • RFC 1483 Bridged •... -
Page 78: P P E N D I X D - W A R A N T I E S
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 – – D2. Warranty Repair 1. During the first three (3) months of ownership, XAVi D1. Product Warranty Technologies will repair or replace a defective product covered under warranty within twenty-four (24) hours of XAVi Technologies warrants that the ADSL unit will be free from receipt of the product. -
Page 79: E1. Fcc Part 15 Notice
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 – – E2. IC CS-03 Notice The Industry Canada label identifies certified equipment. This certification means that equipment meets certain E1. FCC Part 15 Notice telecommunications network protective, operational, and safety... -
Page 80: E3. Ul Safety Regulations
X5368r-P3 User’s Manual Version 1.0 X5368r-P3 User’s Manual Version 1.0 E3. UL Safety Regulations Disconnect TNV circuit connector or before removing cover or Contact Information equivalent. Disconnect TNV circuit connector(s) before disconnecting power. Do not use this product near water for example, near a bathtub,...