Panasonic CF-51 Series Operating Instructions Manual page 23

Display
The external display does
not work normally.
Shutting down
Windows does not shut
down.
Touch Pad
The cursor does not work.
Cannot input using the
touch pad.
Reference Manual
The Reference Manual is
not displayed.
Reinstalling B's Recorder/B's CLiP
A serial number is
requested when reinstalling.
Others
No response.
If the external display does not support the power saving function, it may not work
normally when the computer enters the power saving mode. Turn off the external
display.
Remove the USB device.
Wait one or two minutes. It is not a malfunction.
When using the external mouse, connect it correctly.
Restart the computer using the keyboard.
, U, and R to select [Restart].)
(Press
If the computer does not respond to keyboard commands, read "No response"
( below).
Set [Touch Pad] to [Enable] in the [Main] menu of the Setup Utility.
The drivers for some mice may disable the touch pad. Check your mouse's operat-
ing instructions.
Install Adobe Reader.
A Log on to Windows as an administrator.
B Click [start] - [Run], input [c:\util\reader\AdbeRdr70_enu_full.exe], then click
[OK].
C Follow the on-screen instructions.
Input the following serial number
B's Recorder:
B's CLiP:
Press Ctrl+Shift+Esc to open Task Manager and close the software application
that is not responding.
An input screen (e.g., password input screen at startup) may be hidden behind
another window. Press Alt+Tab to check.
Press the power button for four seconds or longer to shut down the computer, and
then press the power button to turn it on. If the application program does not work
normally, uninstall and reinstall the program. To uninstall, click [start] - [Control
Panel] - [Add or Remove Programs].
23