Advertisement
Table of Contents
- 1 Important Safety Instructions
- 2 Important Notes
- 3 Protect Your Furniture
- 4 Location of Controls
- 5 Precautions for Use
- 6 Listening to Radio
- 7 Manual Tuning
- 8 Playing Compact Discs
- 9 Getting Started
- 10 General Operation
- 11 Care and Maintenance
- 12 Cleaning the Unit
- 13 Troubleshooting Guide
- 14 Specifications
- Download this manual
Advertisement
Table of Contents
Summary of Contents for Encore 9282
- Page 1 CD PLAYER WITH TURNTABLE AND STEREO RADIO MODEL 9282 INSTRUCTION MANUAL...
-
Page 2: Important Safety Instructions
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPORTANT SAFETY INSTRUCTIONS 1. -
Page 3: Important Notes
PRECAUTION BEFORE USE • UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL. • DO NOT CONNECT THE UNIT TO AN AC OUTLET BEFORE CHECKING THE OUTLET’S VOLTAGE AND ALL OTHER CONNECTIONS HAVE BEEN MADE. • DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL INCHES AROUND THE UNIT FOR VENTILATION. -
Page 4: Location Of Controls
Location of controls 1) Dust cover 2) CD play/pause button 3) CD stop button 4) CD skip up down button 5) Rep/Ran button 6) Program button 7) Volume up/down button 8) Power button 9) CD tray 10) CD tray open button 11) 3.5mm stereo headphone jack 12) Function selector 13) Radio band selector... -
Page 5: Listening To Radio
Connection Connect the power cord to AC outlet. Connect the speaker wire to the speaker jack (25) located on the rear side of unit. Press the power button(8) and the power LED indicator(14) will light up which means the power supply is normal. Now your system is ready to play the music. -
Page 6: General Operation
Play / pause mode Press play/pause button(2) to start to play. The first track will be played and the playing track will show on the LCD display(15). If play/pause button(2) was pressed during play mode, go to pause mode and the track number will be flashing. Stop mode If stop button(3) is pressed during play or pause mode, go to stop mode and the total number of tracks will be displayed. -
Page 7: Care And Maintenance
Phono NOTE: Remove the stylus (needle) protector. Securing the tone arm to the arm rest there is a little clip. Be sure to raise the clip from the tone arm before playing. When not playing, snap the clip back over the tone arm to keep it secure. -
Page 8: Troubleshooting Guide
TROUBLE SHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION • The unit is disconnected from the • Connect to an outlet. AC outlet The unit will not play • The AC outlet has no power • Try the unit in another outlet Unit is ON but •...
Need help?
Do you have a question about the 9282 and is the answer not in the manual?
Questions and answers