Operation - Panasonic Toughbook CF-28 Series Operating Instructions Manual

First-time Operation
3
3
2
1
Power Indicator
Power Switch
10
4
Connect your computer to a power outlet
CAUTION
Be sure the AC adaptor is connected until completing Step 8 on page 11.
When closing the cover, first insert the top of the cover.
2
Handling the AC adaptor
Do not twist or pull the AC power cord forcefully. Doing so may damage the
1
connections.
Use only the specified AC adaptor with your computer. Using an AC adaptor
other than the one supplied might damage the battery and/or the computer.
When the DC plug is not connected to the computer, disconnect the AC cord
from your AC wall outlet.
Problems such as sudden voltage drops may arise during periods of thunder
and lightning. Since this could adversely affect your computer, an uninterruptible
power source (UPS) is highly recommended unless the battery pack is installed.
5
Open the display
Pull the carrying handle forward.
1
Lift up the latch.
2
Lift open the display.
3
NOTE
When using the computer for the first time, do not connect any peripheral device
except the battery pack and AC adaptor to the computer.
6
Turn your computer on
Rotate the power switch clockwise and hold it for approximately one second until the
power indicator turns on before releasing it.
CAUTION
Do not rotate the power switch repeatedly.
Once the computer is powered off, you must wait at least ten seconds before
powering it on again.