Page 2
Neither MacroSystem Digital Video GmbH nor its dealers are responsible for any damages resulting either directly or indirectly from the use of the software or the operating instructions, e.g. for profit loss, costs, hardware or software problems or other problems.
There are many different The RenderBooster will give you the opportunity to use your camcorder formats to begin with – and it is often desirable to Casablanca video editing system even more effectively than create a Blu-ray disk, a common DVD, plus a few different PC/ before.
Remove the RenderBooster from its packaging. Take off the tically detects the “Render Booster” (if the required add-on cap and plug the RenderBooster in one of the USB ports at the product has been activated by typing in the key code).
The use of the RenderBooster can be switched on and off. To do this, open the “Settings” window and select RenderBooster on or off. It is not necessary to restart.
Please note: the RenderBooster should not be connected or disconnected while the system is in use. If you have trouble using the RenderBooster for the first time, it is possible that the firmware update did not succeed. Repeat the procedure for its initial use.