Mercedes-Benz B-Class Operator's Manual page 166

Driving systems
164
vehicle occupant or from outside the
vehicle.
the electrical system in the engine
R
compartment, the battery or the fuses have
been tampered with.
the battery is disconnected.
R
the accelerator pedal has been depressed,
R
e.g. by a vehicle occupant.
There is a risk of an accident.
If you wish to exit the vehicle, always turn off
DISTRONIC PLUS and secure the vehicle
against rolling away.
Deactivating DISTRONIC PLUS
( Y page 165).
If DISTRONIC PLUS detects that the vehicle
in front is stopping, it brakes your vehicle until
it is stationary.
Once your vehicle is stationary, it remains
stationary and you do not need to depress the
brake.
i After a time, the electric parking brake
secures the vehicle and relieves the service
brake.
i Depending on the specified minimum
distance, your vehicle will come to a
standstill at a sufficient distance behind the
vehicle in front. The specified minimum
distance is set using the control on the
cruise control lever.
The electric parking brake automatically
secures the vehicle if DISTRONIC PLUS is
activated and:
the driver's door is open and the driver's
R
seat belt is unfastened.
the engine is switched off, unless it is
R
automatically switched off by the ECO
start/stop function.
a system malfunction occurs.
R
the power supply is not sufficient.
R
If a malfunction occurs, then the transmission
may be shifted into position P automatically.
Storing the current speed or calling up the
last stored speed
G
WARNING
If you call up the stored speed and it differs
from the current speed, the vehicle
accelerates or decelerates. If you do not know
the stored speed, the vehicle could accelerate
or brake unexpectedly. There is a risk of an
accident.
Pay attention to the road and traffic
conditions before calling up the stored speed.
If you do not know the stored speed, store the
desired speed again.
X
Briefly pull the cruise control lever
( Y page 161) towards you.
X
Remove your foot from the accelerator
pedal.
DISTRONIC PLUS is activated. The first
time it is activated, the current speed is
stored. Otherwise, it sets the vehicle cruise
speed to the previously stored value.
Setting a speed
Keep in mind that it may take a brief moment
until the vehicle has accelerated or braked to
the speed set.
To store the current speed or a higher
:
speed
To store the current speed or a lower
;
speed