Yamaha TSX-B141 Owner's Manual page 10

NAMES OF PARTS AND THEIR FUNCTIONS
Rear panel
1 FM antenna terminal
Connect the supplied FM antenna.
2 GND
Connect the cable core of the FM antenna (see
below).
3 AUX
Connect an external device (☞ P. 15).
Connecting the FM antenna
It is recommended to connect the FM antenna to the GND terminal before connecting to the FM antenna
terminal.
FM antenna
GND cable
1
Remove insulation and twist
the edge of the cord.
FM antenna
6
En
2
Fully unscrew the GND terminal, then wind the
cord inside the ring part of the GND terminal.
4 15V
Connect the supplied AC adaptor and power
cable.
5 ALARM TYPE
Sets the alarm type of the IntelliAlarm function
(☞ P. 17).
6 CLOCK
Adjusts the clock (☞ P. 7).
Ring
GND
3
Tighten the GND terminal taking care
not to slip the cord off from the
terminal.
4
Connect the supplied FM antenna to the unit.