Status Indicators - 3DR X8+ Operation Manual

Status Indicators

LED
The Pixhawk LED indicates the status of the X8. During flight, the LED won't
be visible, so you will need to use a ground station to view the status of the
X8. Visit 3DR.com/X8/info to listen to Pixhawk's status tones.
X8 Status LED
22
Initializing, hold the X8 still and level
Acquiring GPS, please wait
Autopilot ready, GPS locked
Armed
Loss of RC signal, automatic landing
Low battery, automatic landing
Loss of GPS signal, switch to standard mode (altitude hold)
Pre-arm safety check failure. Connect to a ground station
and see the troubleshooting section.
Status LED