Advertisement
Care and Maintenance
Though its powder-coated finish is rust-resistant, steel is prone to rust over time with
exposure to the elements. In case of rust or scratches, lightly sand the affected area
and apply touch-up paint. To maintain the finish periodically apply wax with a soft cloth.
Wash frames and cushions with a mild solution of soap and water; rinse thoroughly.
Dry completely and drip-dry cushions. Do not use bleach or solvents.
Pre-Assembly
PLANNING ASSEMBLY
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
OBSERVE WEIGHT LIMITS
The recommended weight limits for the following products are listed below:
Rocker: 225 lbs
CAUTION: If you overload your
furniture, injuries can occur.
HARDWARE INCLUDED
NOTED: Hardware not shown
to actual size.
Da (2)
Bolt
Db (2)
Metal Washer
Dc (2)
Locker
Dd (2)
Nut
Safety Information
Do not completely tighten bolts and nuts until indicated in assembly step.
De (1)
Open Hex Wrench
Df (1)
Hex Wrench
Dg (1)
Assembly
Instructions Sheet
4
Advertisement
