Ungo ProSecurity K20 User Manual
  1. Manuals
  2. Brands
  3. Ungo ProSecurity Manuals
  4. Car Alarm
  5. K20
  6. User manual

Ungo ProSecurity K20 User Manual

Hide thumbs

Advertisement

Table of Contents

Ungo ProSecurity

Advertisement

Table of Contents
loading

Summary of Contents for Ungo ProSecurity K20

  • Page 1 Ungo ProSecurity...
  • Page 2 Ungo ProSecurity SAA474U SAA474U RK20 Remote Keyless Entry System Remote Start / Keyless Entry System   (2) 4-Button Remote Transmitters (SAA474U) (2) 4-Button Remote Transmitters (SAA474U)   Anti-Code Grabbing Technology Anti-Code Grabbing Technology   Starter Disable Output On-Board Relays for Remote Start with Anti-Grind Circuit ...
  • Page 3 Ungo ProSecurity SAA474U SAA7101U SAA477U SR7000 SR9000 2-Way Security / Remote Start / Keyless Entry System 1-Mile Range 2-Way Security / Remote Start / Keyless Entry System  (1) 2-Way LCD Remote Transmitter (SAA477U)  (1) 2-Way LCD Remote Transmitter (SAA7701U) ...
  • Page 4 Ungo ProSecurity Ungo Feature Descriptions sunroof by holding the key in the driver’s door lock position, and will operate on both single input systems and two pulse dead bolt systems. SDC (Secure Digital Communication) In order to achieve a reliable 1-mile of range from the...
  • Page 5 Ungo ProSecurity Programmable Override Sequence stage impact sensor. ProSecurity systems can be programmed to respond to one to five pulses of the Valet/Override switch to Selectable Ignition Controlled Door Locks disarm the system. When the ignition is turned ON, the doors will lock within 3 seconds and unlock when the ignition is turned OFF.
  • Page 6 Ungo ProSecurity Obtaining Optimal Range Turning OFF the Anti-Code Grabbing Technology (a.k.a. Code Hopping) Although this is a feature designed to prevent the remote Mounting the Extended Range Antenna transmitters from being cloned and re-transmitted to the 1. Clean the mounting area on the windshield with a control unit, it is virtually impossible to do.
  • Page 7 Ungo ProSecurity will show between 1V and 6V AC. In multi-coil Tachometer Reference Options systems, the system can learn individual coil wires. Individual coil wires in a multi-coil system will register Tachless lower amounts of AC voltage. Also, if necessary, the...
  • Page 8 Ungo ProSecurity system. If the key cylinder itself is pulled out or damaged, it will not generate the resistance code and vehicle will not run. Passkey 3 The Immobilizer uses an antenna ring around the ignition cylinder to energize a small transponder chip hidden in the ignition key.

  • Page 9: Transmitter/Receiver Learn Routine

    The Valet/Override button must be in working order and plugged into the blue port on the Ungo ProSecurity system. There is a basic sequence to remember whenever programming a system: Door, Key, Choose, Transmitter and Release.
  • Page 10 Ungo ProSecurity RK1: Remote Start/Keyless System Replacement Remote Transmitter: SAA474U Replacement Battery: CR2032 Ch. Number Function Wire Color Auto-Learn Lock, Panic On / Panic Off Unlock, Panic Off Silent Mode/Channel 2 Red/White Remote Start Channel 4 Violet/Black Turbo Timer / Short Run...
  • Page 11 Ungo ProSecurity S100/S400: Security/Keyless System Replacement Remote Transmitter: SAA474U Replacement Battery: CR2032 Ch. Number Function Wire Color Arm/Disarm/Panic Silent Mode/Remote Override/Trunk Release Red/White Remote Engine Start or Other Accessory White/Blue Arm Only Disarm Only Panic Only Auto-Learn Standard Configuration Auto-Learn Single Button Arm/Disarm Configuration...
  • Page 12 Ungo ProSecurity SR1000: Remote Stat/Security/Keyless System Replacement 4-Button Remote Transmitter: SAA474U Replacement Battery: CR2032 Ch. Number Function Wire Color Auto-Learn Standard Configuration Arm Only Disarm Only Silent Mode/Remote Override/Trunk Release Red/White Remote Start Channel 4 Violet/Black Channel 5 White/Black Turbo Timer / Short Run...
  • Page 13 Ungo ProSecurity SR7000: 2-Way Security/Remote Start/Keyless Entry Replacement 4-Button Remote Transmitter: SAA474U Replacement Battery: CR2032 Replacement LCD Remote Transmitter: SAA477U Replacement Battery: AAA Ch. Number Function Wire Color Auto-Learn Standard Configuration Delete Remotes: This feature will erase all remotes from the memory of the system.

  • Page 14: Module Programming Routine

    3.5 Second Door Lock Pulses Double Pulse Unlock OFF Double Pulse Unlock ON Security Features ON Security Features OFF Code Hopping ON Code Hopping OFF K20: Keyless Entry System Feature Default LED ON Setting LED OFF Setting Number (Press "LOCK" Button) (Press "UNLOCK" Button)
  • Page 15 Ungo ProSecurity RK1: Remote Start/Keyless Entry System Factory default settings are indicated in bold in the following feature tables. MENU #1 Feature Default LED ON Setting LED OFF Setting Number (Press "LOCK" Button) (Press "UNLOCK" Button) Active Mode Passive Mode...
  • Page 16 Ungo ProSecurity RS10: Remote Start/Keyless Entry System Factory default settings are indicated in bold in the following feature tables. Feature Default LED ON Setting LED OFF Setting Number (Press "LOCK" Button) (Press "UNLOCK" Button) Engine Check ON Engine Checking OFF...
  • Page 17 Ungo ProSecurity RK20: Remote Start/Keyless Entry System continued Factory default settings are indicated in bold in the following feature tables. MENU #2 Feature Default LED ON Setting LED OFF Setting Number (Press "LOCK" Button) (Press "UNLOCK" Button) Intelli-Tach (1) Voltage (2), OFF (3), Tachometer (4)
  • Page 18 Ungo ProSecurity S660: 2-Way Security/Keyless Entry System Factory default settings are indicated in bold in the following feature tables. MENU #1 Feature Default LED ON Setting LED OFF Setting Number (Press "LOCK" Button) (Press "UNLOCK" Button) Active Arming Passive Arming...
  • Page 19 Ungo ProSecurity SR1000: Remote Start/Security/Keyless Entry System Factory default settings are indicated in bold in the following feature tables. MENU #1 Feature Default LED ON Setting LED OFF Setting Number (Press "LOCK" Button) (Press "UNLOCK" Button) Active Arming Passive Arming...
  • Page 20 Ungo ProSecurity SR5000: 2-Way Remote Start/Security/Keyless Entry System Factory default settings are indicated in bold in the following feature tables. MENU #1 Feature Default LED ON Setting LED OFF Setting Number (Press "LOCK" Button) (Press "UNLOCK" Button) Active Arming Passive Arming...
  • Page 21 Ungo ProSecurity SR6000: Remote Start/Security/Keyless Entry System Factory default settings are indicated in bold in the following feature tables. MENU #1 Feature Default LED ON Setting LED OFF Setting Number (Press "LOCK" Button) (Press "UNLOCK" Button) Active Arming Passive Arming...
  • Page 22 Ungo ProSecurity SR7000: 2-Way Remote Start/Security/Keyless Entry System Factory default settings are indicated in bold in the following feature tables. MENU #1 Feature Default LED ON Setting LED OFF Setting Number (Press "LOCK" Button) (Press "UNLOCK" Button) Active Arming Passive Arming...
  • Page 23 Ungo ProSecurity SR7000: 2-Way Remote Start/Security/Keyless Entry System (continued) Factory default settings are indicated in bold in the following feature tables. MENU #3 Feature Default LED ON Setting LED OFF Setting Number (Press "LOCK" Button) (Press "UNLOCK" Button) Engine Checking: Intelli-Tach...
  • Page 24 Ungo ProSecurity SR9000: 2-Way Remote Start/Security/Keyless Entry System (continued) MENU #2 Feature Default LED ON Setting LED OFF Setting Number (Press "LOCK" Button) (Press "UNLOCK" Button) 30-Second Siren Duration 60-Second Siren Duration False Alarm Prevention Circuitry ON False Alarm Prevention Circuitry OFF...

  • Page 25: Valet Mode

    Ungo ProSecurity Valet Mode To Enter or Exit Valet mode with the Valet/Override Switch: Procedure: 1. Turn the ignition key ON and then OFF 2. At anytime during the next 10 seconds, press and release the Valet/Override switch. Now the status LED will glow constantly if you have entered Valet mode, and goes out if you have exited Valet mode.

  • Page 26: Remote Start Diagnostics

    Ungo ProSecurity Short-Run/Turbo Timer Mode Short run turbo timer mode keeps the engine running after arriving at your destination for a programmed period of 1, 3, 5, or 10 minutes. This allows the system’s timer to conveniently cool down the turbo after you have left the vehicle.

  • Page 27: Alarm Troubleshooting

    Ungo ProSecurity Trouble Shooting Alarm Troubleshooting Shock sensor doesn’t trigger the alarm: Has the false alarm prevention circuitry system been triggered? If so, you will hear 5 chirps when disarming the system. To check this, turn the ignition key ON and OFF to clear the false alarm prevention circuity’s memory, and then retest the shock sensor.
  • Page 28 Ungo ProSecurity The vehicle starts, but the starter keeps running: 1. Is the system programmed for engine checking OFF or voltage sense? When programmed for either or these features, the engine cranks for the preprogrammed crank time regardless of how long it takes for the vehicle to actually start.

  • Page 29: Wiring Quick Reference

    3-Pin 2-Wire Door Lock Harness Wire Color Function Green (-) Lock, (+) Unlock Output Empty Blue (-) Unlock, (+) Lock Output K20: Keyless Entry System Main Harness Wire Color Function Violet Unlock #87 Normally Open Input Red/White (-) Output for Channel 2...
  • Page 30 Ungo ProSecurity RK1: Remote Start/Keyless Entry System Main Harness Wire Color Function Orange Ground When Armed (-) 500mA White (+/-) Parking Light Output White/Blue (-) Activation Input Black/White (-) 200mA Domelight Supervision Output Green Not Used Blue (-) Second Unlock Output...
  • Page 31 Ungo ProSecurity RS10: Remote Start/Keyless Entry System Main Harness Wire Color Function White (+/-) Parking Light Output Black (-) Chassis Ground Red/White (-) 200mA Channel 2 Auxiliary Output White/Red (+) Activation Input Gray/Black (-) Wait-to-Start Input White/Blue (-) Activation Input...
  • Page 32 Ungo ProSecurity RK20: Remote Start/Keyless Entry System Main Harness Wire Color Function White (+/-) Parking Light Output Black (-) Chassis Ground Red/White (-) 200mA Channel 2 Auxiliary Output Brown (-) Horn Honk Output Orange (-) Ground-When-Locked White/Blue (-) Activation Input...
  • Page 33 Ungo ProSecurity S100: Security/Keyless Entry System Main Harness Wire Color Function Orange Ground When Armed (-) 500mA White (+/-) Parking Light Output White/Blue (-) 200mA Channel 3 Validity Output Black/White (-) 200mA Domelight Supervision Output Green (-) Door Trigger Input...
  • Page 34 Ungo ProSecurity S660: 2-Way Security/Keyless Entry System Main Harness Wire Color Function Orange Ground When Armed (-) 500mA White (+/-) Parking Light Output White/Blue No Function Black/White (-) Domelight Supervision Output Green (-) Door Trigger Input Blue (-) Instant Trigger Input...
  • Page 35 Ungo ProSecurity S670: 2-Way Security/Keyless Entry System Main Harness Wire Color Function Orange Ground When Armed (-) 500mA White (+/-) Parking Light Output White/Blue (-) Channel 3 Auxiliary Output Black/White Domelight Supervision Output Green (-) Door Trigger Input Blue (-) Instant Trigger Input...
  • Page 36 Ungo ProSecurity SR1000: Remote Start/Security/Keyless Entry System (continued) 5-Pin Harness Wire Color Function Black/White (-) Neutral Safety Input Violet/White Tachometer Input Brown (+) Brake Shutdown Input Gray (-) Hoodpin Shutdown Input Blue/White (-) 200mA Status/Defogger Output 6-Pin Harness Wire Color Function Lt.
  • Page 37 Ungo ProSecurity SR5000: 2-Way Remote Start/Security/Keyless Entry System Main Harness Wire Color Function Orange Ground When Armed (-) 500mA White (+/-) Parking Light Output White/Blue (-) Activation Input Black/White (-) Domelight Supervision Output Green (-) Door Trigger Input Blue (-) Instant Trigger Input...
  • Page 38 Ungo ProSecurity SR6000, SR7000, SR9000: 2-Way Remote Start/Security/Keyless Entry System Main Harness Wire Color Function Orange Ground When Armed (-) 500mA White (+/-) Parking Light Output White/Blue (-) Activation Input Black/White (-) Domelight Supervision Output Green (-) Door Trigger Input...
  • Page 39 Ungo ProSecurity SR6000, SR7000, SR9000: 2-Way Remote Start/Security/Keyless Entry System 4-Pin Harness on Realy Satellite Wire Color Function Pink (-) 200mA 3rd Ignition Output Violet (-) 200mA 2nd Starter Output Orange (-) 200mA 2nd Accessory Output Blue (-) Status Output...

This manual is also suitable for:

Rk20S100S670Sr7000Sr9000

Table of Contents