LG wt7700h*a Owner's Manual page 23

HOW TO USE 23
CYCLE MODIFIER BUTTONS
Each cycle has default settings that are selected
automatically. You may also customize these set-
tings using the cycle modifier buttons. Press the
button for the desired modifier until the indicator
light for the desired setting is lit. The washer auto-
matically adjusts the water level for the type and
size of wash load for best results and maximum
efficiency. Due to the high-efficiency nature of this
product, water levels may be much lower than ex-
pected. This is normal and cleaning/rinsing perfor-
mance will not be compromised.
NOTE: To protect your garments, net every wash/
temperature, spin speed, soil level, or option is
available with every cycle. A chime will sound and
the LED will not light if a selection is not allowed.
Extra Hot
Hot
Warm
Cold
Tap
Cold
i T mp. I
ExtraHigh Heavy
High A
Medium Normal
Low A
NoSpin Light
Spin I Soil
Add Garment
Rinse+Spin
Spin 0nly
Stain Care
Soak
I Options ]
Temp.
Temp. selects the wash and temperature combi-
nation for the selected cycle. Press the Temp. but-
ton until the indicator light for the desired setting
is lit. All rinses use tap cold water.
• Select the water temperature suitable for the
type of load you are washing. Follow the gar-
ment fabric care labels for best results.
Spin
Higher spin speeds extract more water from
clothes, reducing drying time and saving energy.
Press the Spin button until the desired speed is
selected. Some fabrics, such as delicates, require
a slower spin speed. To protect your clothing, not
all spin speeds are available for all cycles.
Soil
Adjusting the soil level setting will modify the cy-
cle times and/or wash actions. Press the Soil but-
ton until the desired soil level is selected.
NOTE: This feature needs more time for heavily
soiled loads or less time for lightly soiled loads.
Options
Pressing the Options button will allow you to se-
lect additional features, such as Soak, Stain Care,
Spin Only, and Rinse+Spin. Pressing the Options
button before selecting a cycle will automatically
default to the Normal cycle with the Soak feature
selected.