IMPORTANT SAFEGUARDS Failure to follow these instructions and warnings may cause death, personal injury and/or property damage. Safety precautions should always be followed when using electrical appliances, including the following: READ ALL INSTRUCTIONS, PRODUCT LABELS & WARNINGS BEFORE USE. Do not lift or move unit during operation. Do not leave appliance unattended.
FOR HOUSEHOLD USE ONLY INTRODUCTION Congratulations on the purchase of your new freshTECH Automatic Jam & Jelly Maker. Your new Jam & Jelly Maker will provide you and your family with fresh, delicious homemade jams and jellies for toast, bagels, waffles, crêpes, or anything else you can cook up.
CONTROL PANEL DIAGRAM jelly a. Cancel button c. Jam button e. Increase / Decrease Time b. Enter button d. Jelly button f. LED Display GLASS LID ASSEMBLY a. Screw b. Large Stainless Steel Washer c. Silicone Washer d. Glass Lid e.
USING YOUR JAM MAKER CLEAN YOUR APPLIANCE BEFORE USING THE FIRST TIME Carefully clean your freshTECH Automatic Jam & Jelly Maker before its first use. Just follow these simple steps: Wash the Glass Lid, Stirrer and Pot in warm soapy water, rinse and dry thoroughly.
PREPARING FOR USE Parts Needed when Making Jam: Parts Needed when Making Jelly: • Base • Base • • • Stirrer • Stirrer • Glass Lid • Glass Lid* *Glass Lid only used in one jelly recipe ASSEMBLING THE UNIT FOR JAM & JELLY MAKING For best results, the unit must be placed on a level cooking surface.
HOW TO MAKE JAM The following steps are general directions for jam making – please refer to the Recipe Book for a variety of recipes. Recipes have been created specific to this machine, the size of the pot and the nature of the ingredients. Other recipes are not guaranteed to work with this appliance.
Page 10
J. If necessary, skim foam from top of jam and preserve, following the steps on Preserving Instructions in the Recipe Book. Never attempt to pour jam from the Pot into another container – always use a non-metal spoon or ladle (such as wood, bamboo, plastic or silicone) to remove the jam from the Pot.
Page 11
G. At the end of the cooking process, the Jam & Jelly Maker will beep again to indicate cancel the process is complete. After the beep, press the button and unplug the power cord to turn off the unit. H. Remove the Stirrer, taking care not to touch any metal parts or glass surfaces. Set aside either in the sink or on an oven-safe plate, as the metal rod inside the Stirrer will be hot.
HELPFUL HINTS Here are a few simple tips to help you get the most of your new Jam & Jelly Maker: If a mistake is made in programming or if you need to stop the entire jelly cancel process, pressing the button allows you to clear the recipe program and to restart from 00.
CLEANING YOUR JAM & JELLY MAKER AFTER USE Note: It is recommended that you clean the appliance in between uses. WARNING! As with any cooking appliance, metal parts – and even some plastic parts – can become extremely hot to the touch. Always let the appliance cool completely –...
• Pot, Stirrer, Knob Only and Glass Lid – Call 1-800-240-3340 in the U.S. To assist us in serving you, please have the freshTECH Jam & Jelly Maker model number and date of purchase available when you call. The model number is located on the bottom of the appliance Base.
WARRANTY INFORMATION 1-YEAR LIMITED WARRANTY Hearthmark, LLC doing business as Jarden Home Brands warrants that for a period of one year from the date of purchase, this product will be free from defects in material and workmanship. Jarden Home Brands, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period.
Page 16
Ball Corporation, used under license. ® U.S. 1-800-240-3340 Visit us online at www.freshpreserving.com for more exciting ideas, entertaining tips and delicious recipes! Rev 2.0 (2016-05-02) Model FTJM-12-01 D667,256 and Patent Pending Printed in China P.N. 144302 Rev. D...
Need help?
Do you have a question about the FTJM-12-01 and is the answer not in the manual?
Questions and answers
what does co mean on the maker?
"CO" on the Freshtech FTJM-12-01 maker means the unit is in cooling mode and is not ready for the next batch.
This answer is automatically generated