Page 1
IMPORTANT File in your maintenance records Stryker Adel Maternity Bed Model 4700 & 4702 MAINTENANCE MANUAL For Parts or Technical Assistance 1–800–327–0770...
Introduction INTRODUCTION This manual is designed to assist you with the maintenance of the Stryker Adel Maternity Bed. Read it thor- oughly before beginning any maintenance on the equipment. SPECIFICATIONS Maximum Weight Capacity 500 pounds (227 kilograms) Bed Length/Width 90” x 41” (with siderails up) – 37” (with siderails down) 229 cm x 104 cm (with siderails up) –...
Introduction SAFETY TIPS AND GUIDELINES Before operating the Stryker Adel Maternity Bed, it is important to read and understand all information in this manual. Carefully read and strictly follow the safety guidelines listed on this page. It is important that all users have been trained and educated on the inherent hazards associated with the usage of electric beds.
Refer to unpacking instructions attached to the bed inside the crate. SET–UP PROCEDURES It is important that the Stryker Adel Maternity Bed is working properly before it is put into service. The following list will help ensure that each part of the bed is tested.
Page 8
Bed Symbols Warning, Refer to Service/Maintenance Manual Alternating Current Type B Equipment: equipment providing a particular degree of protection against elec- tric shock, particularly regarding allowable leakage current and reliability of the protec- tive earth connection. Class 1 Equipment: equipment in which protection against electric shock does not rely on BASIC INSULATION only, but which includes an additional safety precaution in that means are provided for the connection of the EQUIPMENT to the protective earth con- ductor in the fixed wiring of the installation in such a way that ACCESSIBLE METAL...
Page 9
Bed Symbols SYMBOL DESCRIPTION Warning: Potential Electrical Shock if Cover is Removed. Keep Feet Clear. Warning: Read all Instructions Before Plugging in the Bed. Warning: Unplug Bed Before Using the Hand Crank. Night Light On/Off Switch CPR Release Lift to Lower Lift to Move In or Out...
Page 10
Bed Symbols SYMBOL DESCRIPTION 1. Raise Fowler (back rest). 2. Raise foot section. 3. Lower Fowler. 4. Lower foot section. Activate Nurse Call 1. Turn TV or radio on or select a channel. 2. Increase volume. 3. Decrease volume. 1. Turn the room light on or off. 2.
Page 11
Bed Symbols SYMBOL DESCRIPTION 1. Raise Fowler (back rest). 2. Raise bed height. 3. Raise foot section. 4. Lower Fowler (back rest). 5. Lower bed height. 6. Lower foot section. 1. Lower head end of bed. 2. Toggle siderail lights to different settings. 3.
Page 12
Bed Symbols SYMBOL DESCRIPTION 1. Turn TV or radio on or select a channel. 2. Activate Nurse Call. 3. Increase volume. 4. Decrease volume. 5. Turn the room light on or off. 6. Turn the bed overhead light on or off. 7.
Page 13
Bed Illustration WARNING Potential pinch points...
If these types of products are used to clean Stryker patient handling equipment, measures must be taken to insure the stretchers are rinsed with clean water and thoroughly dried following cleaning. Failure to properly rinse and dry the stretchers will leave a cor- rosive residue on the surface of the stretcher, possibly causing premature corrosion of critical components.
Preventative maintenance should be performed at a minimum of annually. A preventative maintenance pro- gram should be established for all Stryker Medical equipment. Preventative maintenance may need to be performed more frequently based on the usage level of the product.
All electronic service parts will be shipped in static shielding bags. Do not open the bags until you have com- pleted steps 2 and 3 of the following procedure. All circuit boards must be returned to Stryker Medical. Return circuit boards in the static shielding bags the new boards were shipped in.
Service Information – Base STEER WHEEL CABLE ADJUSTMENT Required Tools: (2) 10 mm Open End Wrenches Adjustment Procedure: 1. Remove the base frame cover from the (patient) right side of the bed. 2. Position the steer pedal (located at the head end of the bed) in the off position. 3.
Service Information – Litter LIFT MOTOR REMOVAL AND REPLACEMENT (CONTINUED) Removal Procedure (Continued): 21. Move the lift motor assembly toward the head end of the bed. 22. Remove the motor by lowering it and moving it toward the head end of the bed. 23.
Service Information – Litter SKOOCHERt MOTOR REMOVAL AND REPLACEMENT Required Tools: 3/8” Socket Wrench 5/16” Socket Wrench Removal Procedure: 1. Raise the bed and the Fowler to the full up position. 2. Run the Fowler to the full out position (toward the head end of the bed). WARNING If the Fowler slide will not run electrically, it must be manually cranked out (toward the head of the bed) to prevent personal injury when the motor is removed.
Service Information – Litter FOWLER MOTOR REMOVAL AND REPLACEMENT (CONTINUED) 8. Unplug the capacitor wires. 9. Lift the electrical pan up slightly and turn it sideways on an angle. WARNING It is important to properly support the Fowler before proceeding or personal injury could result. 10.
Service Information – Litter POWER SUPPLY BOARD REPLACEMENT Required Tools: 3/8” Socket Ratchet Needle Nose Pliers Procedure: 1. Properly ground yourself (see page 15 for static discharge precautions). 2. Raise the Fowler to the full up position. 3. Unplug the bed power cord from the wall socket. 4.
Service Information – Litter OPTIONAL POWER BOARD REPLACEMENT Required Tools: 3/8” Socket Ratchet 5/16” Nut Driver Removal Procedure: 1. Properly ground yourself (see page 15 for static discharge precautions). 2. Raise the Fowler to the full up position. 3. Unplug the bed power cord from the wall socket. 4.
Page 24
Service Information – Litter LIFT, FOOT, AND FOWLER CALIBRATION PROCEDURE (CONTINUED) Lift Calibration Procedure (Continued): 4. Press the “bed up” button and raise the bed until the seat section skin is 37 1/2” above the floor (±1/8”). 5. To set the lift limit: press first the “head down” (Trendelenburg) button, then the “bed up” button. Note: It is important to press the “head down”...
Service Information – Litter SMART TV INTERFACE BURN–IN PROCEDURE This procedure is used for selecting the style of TV interface desired for your bed. If traditional TV is desired, no calibration is required. If optional Smart TV is available on the bed, select one of the TV manufacturers listed in the table below.
Electrical Troubleshooting TROUBLESHOOTING GUIDE DEFINITIONS: DMM = Digital Multi–Meter PCB = Printed Circuit Board CPU = Central Processing Unit NOTE See pages 28–32 for an outline of bed PCB’s and voltage test points. See pages 22 & 23 for potentiometer calibration.
Page 27
Electrical Troubleshooting TROUBLESHOOTING GUIDE (CONTINUED) PROBLEM/FAILURE RECOMMENDED ACTION No Fowler down motion. A. Enter diagnostics, (see page 22) and check for Fowler down motion. If motion is present, re–burn all limits. B. If no Fowler down motion is present, check the Fowler Slide Out switch for proper connection.
Electrical Troubleshooting TROUBLESHOOTING GUIDE (CONTINUED) PROBLEM/FAILURE RECOMMENDED ACTION No Lumbar Firm. A. Check for 5VDC on HDR2 pin 2 and 1 of the option power board. B. Check for 12 VDC on HDR2 pin 3 (Red) and 1 (Black) of the option power board. C.
Bed Circuit Boards CPU BOARD KIT WITH HEAD WALL INTERFACE – P/N 5010–500–2 CPU BOARD KIT WITHOUT HEAD WALL INTERFACE – P/N 5010–500–3 59–137 Shunt for No Nurse Call...
Bed Circuit Boards CPU BOARD KIT WITH HEAD WALL INTERFACE – P/N 5010–500–2 CPU BOARD KIT WITHOUT HEAD WALL INTERFACE – P/N 5010–500–3 CONNECTOR CABLE VOLTAGE POSITIVE NEGATIVE DESCRIPTION LOCATION LOCATION LEAD LEAD HDR 2 +12 VDC Pin 1 Pin 4 or 5 Relays &...
Page 31
Bed Circuit Boards CPU BOARD KIT WITH HEAD WALL INTERFACE – P/N 5010–500–2 CPU BOARD KIT WITHOUT HEAD WALL INTERFACE – P/N 5010–500–3 CONNECTOR CABLE VOLTAGE POSITIVE NEGATIVE DESCRIPTION LOCATION LOCATION LEAD LEAD HDR 30 0 VAC w/o Switch Pin 1 Neutral Pin 3 Fowler Down 120 VAC w/...
Page 32
Bed Circuit Boards POWER SUPPLY – P/N 59–157 CONNECTOR VOLTAGE POSITIVE LEAD NEGATIVE LEAD LOCATION 110V Pin 1 Pin 2 Pin 1 Pin 4 or 5 Pin 2 Pin 4 or 5 Pin 3 Pin 4 or 5 Pin 4 Pin 4 or 5 Pin 5 Pin 4 or 5...
Page 33
Bed Circuit Boards OPTION POWER BOARD – P/N 5000–300–900 HDR 2 HDR 11 HDR 5 HDR 7 HDR 8 HDR 1 CONNECTOR CABLE VOLTAGE POSITIVE NEGATIVE DESCRIPTION LOCATION LOCATION LEAD LEAD HDR 1 120 VAC* Pin 1 Pin 2 AC Line Voltage from CPU Board HDR 2 +5 VDC...
Page 34
HDR 3 +5 or +12 VDC Pin 1 Power/control line from the TV Note: This header provides TV control to a non–Stryker pendant +5 or +12 VDC Pin 34 Pin 33 Power/Control line from the TV Note: If this polarity is reversed, place...
Head Wall Output Configuration 37–PIN CONNECTOR STRYKER PENDANT PORT Pin 1 Option 2 Common Pin 2 Read Light Pin 3 Room Light Pin 4 Speaker High Pin 5 Pot Wiper Pin 6 Radio Common Pin 7 Nurse Call Interlock Pin 8 Audio Transfer –...
3001–303–160 Optional Bed Communications Tester Item Part No. Part Name Qty. 3001–303–160 BCT Unit 3001–303–825 37–Pin Cable 3001–303–162 Instructions 3000–303–871 9V Battery...
Base Assembly Item Part No. Part Name Qty. 3–79 Hex Hd. Cap Screw 4–12 Soc. Hd. Cap Screw 4–24 Soc. Hd. Cap Screw 4–28 Soc. Hd. Cap Screw 4–298 Soc. Hd. Cap Screw 4–32 Soc. Hd. Cap Screw 4–86 Soc. Hd. Cap Screw 4–114 Soc.
Page 43
715–201–150 Brake Adjuster Assembly Item Part No. Part Name Qty. 715–1–180 Cam Bearing 715–201–62 Threaded Stud Assembly 14–4 Nylon Washer 28–8 External Retaining Ring...
Front Cover Assembly 28–23 External Retaining Ring 5010–30–24 Fowler Slide, Left 28–120 External Retaining Ring 5010–30–25 Fowler Slide, Right 38–404 CPR Extension Spring 4700–30–30 Fowler Link 52–727 Grooveless Ret. Ring 4700–30–31 Fowler Guide Weldment 81–243 I–Glide Bearing 5010–30–38 Bar Sleeve 1550–31–2 Threaded End Fitting 5010–30–39...
Page 54
Fowler Motor/CPR Assembly Assembly part numbers 5000–30–271 (Domestic) 5002–30–271 (International) (reference only) Item Part No. Part Name Qty. 3–214 Hex Hd. Cap Screw 11–63 Washer 26–53 Spring Pin 715–1–333 Release Valve Stop Sleeve 3000–300–442 Motor Mount Grommet 3000–300–455 CPR Isolation Bushing 3000–300–456 CPR Isolator 3000–300–461...
Page 55
Fowler Motor/CPR Subassembly Assembly part number 5000–30–369 (Domestic) Assembly part number 5002–30–369 (International) (reference only) Item Part No. Part Name Qty. 28–131 Retaining Ring 3001–300–775 Brake Kit 5000–30–340 Fowler Motor 5002–30–340 230V Fowler Motor 3000–300–604 Warning Label 3000–200–224 Thrust Washer 3000–200–225 Roller Thrust Bearing 3000–300–465...
5000–30–316 Fowler Potentiometer Assembly 8.5K ohms +/–500 ohms 3 Red 4 Black Resistance is measured between Pin 3 Red & Pin 4 Black. Adjust potentiometer to 8.5K ohms +/–500 ohms. Item Part No. Part Name Qty. 4–38 Soc. Hd. Cap Screw 14–8 Nylon Washer 21–149...
4700–30–40 Front Cover Assembly Item Part No. Part Name Qty. 7–58 Truss Hd. Torx 25–50 Rivet 59–136 Push Mount Wire Clip 4700–30–61 Bellows, Left 4700–30–62 Bellows, Right 5010–30–21 Top Cover 5010–30–23 Top Cover Backer Plate 8800–380–000 Neoprene Sponge .33’ 11–53...
Round Hole Plug 38–283 Worm Drive Hose Clamp 81–8 Flange Bearing 81–269 DU Bearing 81–270 DU Bearing 81–271 DU Bearing 4700–30–10 Litter Weldment 5000–1–24 Pivot Pin 5000–30–139 Trend Block Strap 5000–30–144 Drag Link Weldment 5000–30–166 Trend Follower Link 5000–30–171 Trend Motor Mount Plate 5000–30–222...
Page 69
Trend Actuator Assembly Assembly part numbers 5000–30–278 (Domestic) 5002–30–278 (International) (reference only) Item Part No. Part Name Qty. 3–214 Hex Hd. Cap Screw 4–90 Soc. Hd. Cap Screw 11–63 Flat Washer 21–16 Set Screw 5000–230–68 Right Angle Motor Ass’y 5002–30–68 230V Right Angle Motor Ass’y 5000–30–170 Trend Motor Mount Bracket...
Lift Actuator Assembly Assembly part number 5010–230–71 (Domestic) Assembly part number 5012–30–71 (International) Thrust Bearing Installation Detail Item Part No. Part Name Qty. 26–11 Spring Pin 26–267 Spring Pin 59–140 Capacitor 59–155 230V Capacitor 81–9 Bronze Bearing 81–276 Thrust Ball Bearing 5000–30–194 Motor Pivot Block 5000–30–255...
5000–30–225 Bed Lift Potentiometer Assembly 5.8K ohms +/–500 ohms 2 Green 3 Red Resistance is measured between Pin 2 Green & Pin 3 Red. Adjust potentiometer to 5.8K ohms +/–500 ohms. Item Part No. Part Name Qty. 4–38 Soc. Hd. Cap Screw 14–8 Nylon Washer 21–149...
Foot Lift Assembly Item Part No. Part Name Qty. 3–214 Hex Hd. Cap Screw 11–63 Washer 26–267 Spring Pin 4700–30–25 Foot Lift Lock Plate 52–718 Nylon Insulator 3000–200–228 Motor Mounting Plate Grommet 4700–30–36 Foot Lift Shaft 5000–230–68 Right Angle Motor Ass’y 5002–30–68 230V Right Angle Motor Ass’y...
5000–30–317 Foot Potentiometer Assembly 4.0K ohms +/–500 ohms 2 Green 3 Red Resistance is measured between Pin 2 Green & Pin 3 Red. Adjust potentiometer to 4.0K ohms +/–500 ohms. Item Part No. Part Name Qty. 4–38 Soc. Hd. Cap Screw 14–8 Nylon Washer 21–149...
Seat Assembly Assembly part number 5010–30–17 (reference only) Item Part No. Part Name Qty. 4–161 But. Hd. Cap Screw 7–58 Torx Hd. Screw 16–28 Nylock Nut 25–38 Rivet 29–3 Brass Eyelet (page 76) Hand Grip Ass’y, Right (page 77) Hand Grip Ass’y, Left 5010–30–19 Seat Weldment...
Right Hand Grip Assembly Assembly part number 5010–30–60 (reference only) NOTE Reference page 154 & 155 for label. Item Part No. Part Name Qty. 3–32 Hex Hd. Cap Screw 3–57 Hex Hd. Cap Screw 3–73 Hex Hd. Cap Screw 4–5 Soc.
Left Hand Grip Assembly Assembly part number 5010–30–61 (reference only) NOTE Reference page 154 & 155 for label. Item Part No. Part Name Qty. 3–32 Hex Hd. Cap Screw 3–57 Hex Hd. Cap Screw 3–73 Hex Hd. Cap Screw 4–5 Soc.
Glideaway Foot Support Assembly Assembly part number 4700–40 (reference only) Item Part No. Part Name Qty. 3–229 Hex Hd. Cap Screw (page 80 & 81) Foot Mattress Assembly (page 82) Left Upright Assembly (page 83) Right Upright Assembly (page 84)
Page 81
4700–40–70 Slide–Off Foot Mattress Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 25–151 Semi–Tubular Rivet 5000–40–95 Pilot Weldment, Left 4–161 But. Hd. Cap Screw 5000–40–96 Pilot Weldment, Right 4–176 But. Hd. Cap Screw 5000–40–135 Latch Weldment, Left 4–232...
Page 83
Left Upright Assembly Assembly part number 5000–340–132 (reference only) Item Part No. Part Name Qty. 24–61 T–Knob 5010–40–71 Pull Knob 5000–40–134 Latch Pin Sleeve 5000–340–10 Left Upright Weldment 8800–201–100 Retaining Ring 8810–290–600 Compression Spring 8813–070–100 Foot Latch Pin...
Page 84
Right Upright Assembly Assembly part number 5000–340–133 (reference only) Item Part No. Part Name Qty. 24–61 T–Knob 5010–40–71 Pull Knob 5000–40–134 Latch Pin Sleeve 5000–340–11 Right Upright Weldment 8800–201–100 Retaining Ring 8810–290–600 Compression Spring 8813–070–100 Foot Latch Pin...
Left Glideaway Assembly Assembly part number 5010–340–21 (reference only) Item Part No. Part Name Qty. 4–178 But. Hd. Cap Screw 4–320 But. Hd. Cap Screw 11–343 Shim Washer As Req’d 11–411 Washer 28–166 External Retaining Ring 37–220 Hole Plug 81–289 I–Glide Bearing 5010–40–39 Keyhole Plate...
Page 86
Right Glideaway Assembly Assembly part number 5010–340–22 (reference only) Item Part No. Part Name Qty. 4–178 But. Hd. Cap Screw 4–320 But. Hd. Cap Screw 11–343 Shim Washer As Req’d 11–411 Washer 28–166 External Retaining Ring 37–220 Hole Plug 81–289 I–Glide Bearing 5010–40–39 Keyhole Plate...
Page 87
5010–40–59 Left Foot Pan Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 4–42 Soc. Hd. Cap Screw 5000–90–44 “Pull” Label 4–178 But. Hd. Cap Screw 5010–40–27 Slide Weldment 4–335 But. Hd. Cap Screw 5010–40–35 Pan Bottom 4–337 But.
Page 88
5010–40–58 Right Foot Pan Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 4–42 Soc. Hd. Cap Screw 5000–90–44 “Pull” Label 4–178 But. Hd. Cap Screw 5010–40–27 Slide Weldment 4–335 But. Hd. Cap Screw 5010–40–35 Pan Bottom 4–337 But.
Page 89
Assembly part number 5010–340–7 (reference only)
Glideaway Link Assembly, Left Item Part No. Part Name Qty. 1–124 Flat Hd. Machine Screw 3–214 Hex Hd. Cap Screw 4–28 Soc. Hd. Cap Screw 4–316 Soc. Hd. Cap Screw 26–7 Roll Pin 26–45 Roll Pin 26–172 Roll Pin 28–183 Retaining Ring 38–110 Compression Spring...
Page 91
Assembly part number 5010–340–8 (reference only)
Glideaway Link Assembly, Right Item Part No. Part Name Qty. 1–124 Flat Hd. Machine Screw 3–214 Hex Hd. Cap Screw 4–28 Soc. Hd. Cap Screw 4–316 Soc. Hd. Cap Screw 26–7 Roll Pin 26–45 Roll Pin 26–172 Roll Pin 28–183 Retaining Ring 38–110 Compression Spring...
0500–030–040 500XL–Style Foot Pan Assembly Item Part No. Part Name Qty. 8800–210–400 Bushing 8800–222–400 Truss Head Screw 8800–250–700 Internal Tooth Lock Washer (page 94) Foot Pan Latch Assembly 0500–030–019 Foot Pan 8805–905–800 Foot Pan Pad 0051–023–000 Loctite 454 (not shown) Apply item G (Loctite 454) to the mating surfaces of items E &...
8805–906–100 500XL–Style Foot Pan Latch Assembly Item Part No. Part Name Qty. 8805–906–500 Torsion Spring 8839–783–300 Roll Pin 8805–906–300 Foot Pan Latch Base 26–7 Roll Pin 8805–906–200 Foot Pan Latch Pin...
0500–030–039 500XL–Style Push Bar Assembly Item Part No. Part Name Qty. 8800–224–400 Flat Hd. Screw 0500–030–017 Push Bar Bracket, Left 8803–073–800 Pushbar 8805–899–000 Foam Cover 0500–030–018 Push Bar Bracket, Right...
500XL–Style Upright Assembly, Left Assembly part number 5000–240–222 (reference only) Item Part No. Part Name Qty. 24–61 T–Knob 24–62 Plastic Ball 26–43 Spring Pin 5000–40–134 Latch Pin Sleeve 5000–240–190 Left Upright Weldment 8800–201–100 Retaining Ring 8810–290–600 Compression Spring 8813–070–100 Foot Latch Pin...
500XL–Style Upright Assembly, Right Assembly part number 5000–240–223 (reference only) Item Part No. Part Name Qty. 24–61 T–Knob 24–62 Plastic Ball 26–43 Spring Pin 5000–40–134 Latch Pin Sleeve 5000–240–191 Right Upright Weldment 8800–201–100 Retaining Ring 8810–290–600 Compression Spring 8813–070–100 Foot Latch Pin...
5010–30–75 Night Light Assembly 5012–30–75 230V Night Light Assembly BOTTOM VIEW FOOT END Item Part No. Part Name Qty. 8815–002–200 Pan Hd. Screw 52–816 Grommet 59–160 Night Light 59–166 AC Socket 5010–80–18 Night Light Cable 5012–80–18 230V Night Light Cable 7000–1–327 PVC Tubing .33’...
No Head Wall Interface Assembly Assembly part number 4700–30–94 (reference only) Item Part No. Part Name Qty. 4–307 Hex Soc. But. Hd. Cap Screw 59–137 Shunt 3001–300–970 CPU, No Head Wall, No Scale 1 5000–30–367 No Head Wall Plate 5010–300–933...
Page 106
4700–30–92 Pendant Port/No Nurse Call Assembly Item Part No. Part Name Qty. 4–307 Hex Soc. But. Hd. Cap Screw 59–137 Shunt 3001–303–964 Head Wall CPU, Non–Scale 3001–314–920 Pendant Port PCB Ass’y 5010–30–1 Cover Panel 5010–80–19 Pendant Port Option Cable 5010–300–933...
Page 107
Static Plug 3001–300–7 Jack Screw 3001–303–964 Head Wall CPU, Non–Scale 5010–30–1 Cover Panel 5010–80–8 Head Wall Interface Cable 5010–80–20 9V Battery Box Cable 5010–300–933 Eprom Assembly NOTE Items F & K are shown on assembly number 4700–30–80 (Electrical Assembly page 100–102)
Page 108
Head Wall CPU, Non–Scale 3001–314–920 Pendant Port PCB Ass’y 5010–80–8 Head Wall Interface Cable 5010–80–19 Pendant Port Option Cable 5010–80–20 9V Battery Box Cable 5010–300–933 Eprom Assembly NOTE Items F & L are shown on assembly number 4700–30–80 (Electrical Assembly page 100–102)
Optional Air Mattress Assembly Assembly part number 4700–30–95 & 4702–30–95 (230V) (reference only) Item Part No. Part Name Qty. Item Part No. Part Name Qty. 4–169 But. Hd. Cap Screw 5000–80–21 Compressor Cable 14–3 Nylon Washer (page 112) Manifold Assembly 16–3...
4700–48 Optional Power Mattress Assembly Fowler Mattress Cover Fowler Mattress Foam Item Part No. Part Name Qty. (page 111) Perineal Pillow Assembly 5010–30–59 Plastic Cap 8803–002–400 Lumbar Bag NOTE Insert the perineal pillow into the bottom of the mattress. Use the guide pins (B) on the bottom plate to locate the assembly in the holes in the bottom of the mattress cover.
Page 112
5010–30–45 Optional Perineal Pillow Assembly Item Part No. Part Name Qty. 4–189 But. Hd. Cap Screw 7–41 Truss Hd. Mach Screw 5010–30–43 Air Bladder 5010–30–44 Dist. Plate Weldment 5010–30–46 1” Limit Strap 8815–029–200 Tie Wrap H (not shown) 58–56 Edge Cover w/Adhesive 5”...
5000–230–300 Manifold Assembly, Air Mattress Option 5002–30–300 230V Manifold Ass’y, Air Mattress Option Must be wired as shown Item Part No. Part Name Qty. 16–23 But. Hd. Cap Screw 48–159 Barbed Fitting 48–160 Nylon Elbow 48–166 Male Elbow 48–162 Miniature Barbed Tee 48–163 Brass Nipple 5002–30–239...
Siderail Assembly Left Head End Siderail Wire Routing...
Page 119
Siderail Assembly Right Head End Siderail Wire Routing...
Page 120
Siderail Assembly 4700–20–1 Left Head End Siderail 4700–20–2 Right Head End Siderail Item Part No. Part Name Qty. Item Part No. Part Name Qty. 3–226 Hex Washer Hd. Screw 3–226 Hex Washer Hd. Screw 3–344 Hex Hd. Screw w/Patchlock 2 3–344...
Page 121
Blank Module 4700–90–34 Label, Outer, Right, No Options 4700–90–44 Label, Outer, Left, No Options 2035–1–810 Snubber Cable Inner Option Label 4700–20–102 Standard Siderail with Nurse Call Item Part No. Part Name Qty. (page 131) Outer Panel Ass’y, with Nurse Call 5000–90–21 Label, Inner, Right, w/Nurse Call 5000–90–31...
Page 122
Siderail Assembly All labels shown are right side. Inner Option Label 4700–20–112 Standard Siderail with Nurse Call & Lumbar Item Part No. Part Name Qty. (page 131) Outer Panel Ass’y w/Nurse Call 23–112 Tapping Screw Lumbar Option 3000–300–114 Cable Tie Label 5000–90–21...
Page 123
Speaker Seal 3001–400–535 Blank Module 4700–90–33 Label, Outer, Right, w/Skoocher 4700–90–43 Label, Outer, Left, w/Skoocher Inner Option Label 4700–20–118 Standard Siderail w/Skoocher & Nurse Call Item Part No. Part Name Qty. (page 131) Outer Panel Ass’y w/Nurse Call 5000–90–21 Label, Inner, Right, w/Nurse Call 5000–90–31...
Page 124
Siderail Assembly All labels shown are right side. Inner Option Label 4700–20–124 Siderail with Skoocher, NC & Lumbar Item Part No. Part Name Qty. (page 131) Outer Panel Ass’y w/Nurse Call 23–112 Tapping Screw Lumbar Option 3000–300–114 Cable Tie Label 5000–90–21...
Page 125
Siderail Assembly All labels shown are right side. Inner Option Label 4700–20–134 Siderail with Nurse Call, Smart TV & Lights Item Part No. Part Name Qty. (page 131) Outer Panel Ass’y, w/Nurse Call Smart TV 5000–90–93 Label, Inner, Right, N/C, TV, Lights Option Label 5000–90–103...
Siderail Assembly All labels shown are right side. Inner Option Label 4700–20–135 Siderail w/Skoocher, NC, Smart TV, Lights and Lumbar Item Part No. Part Name Qty. (page 131) Outer Panel Ass’y, w/Nurse Call 23–112 Tapping Screw Lumbar/Smart TV 3000–300–114 Cable Tie Option Label 5000–90–93...
Page 127
5010–20–4 Head End Siderail Timing Link Ass’y, Right Item Part No. Part Name Qty. 11–377 Nylon Washer 11–403 Shim Washer 3001–400–227 Arm Wldmt., Right, Head, Foot 3001–400–228 Arm Wldmt., Right, Head, Head 3001–400–501 Siderail Linkage Rivet 5010–20–3 Timing Link, Head End...
Page 128
5010–20–5 Head End Siderail Timing Link Ass’y, Left Item Part No. Part Name Qty. 11–377 Nylon Washer 11–403 Shim Washer 3001–400–127 Arm Wldmt., Left, Head, Foot 3001–400–128 Arm Wldmt., Left, Head, Head 3001–400–501 Siderail Linkage Rivet 5010–20–3 Head End Timing Link...
Siderail Release Lever Assembly, Right Assembly part number 5010–20–6 (reference only) NOTE Reference page 154 & 155 for label. Item Part No. Part Name Qty. 4–278 But. Hd. Cap Screw 16–2 Nylock Nut 2035–400–553 Release Lever 3001–400–514 Release Lever Pad...
Siderail Release Lever Assembly, Left Assembly part number 5010–20–7 (reference only) NOTE Reference page 154 & 155 for label. Item Part No. Part Name Qty. 4–278 But. Hd. Cap Screw 16–2 Nylock Nut 2035–400–553 Release Lever 3001–400–514 Release Lever Pad...
Page 131
4700–20–11 Outer Siderail Panel w/o Nurse Call Option Item Part No. Part Name Qty. 3001–400–599 Handle Insert 4700–20–10 Outer Panel, w/o N.C. 23–112 Tapping Screw...
Page 132
4700–20–9 Outer Siderail Panel w/Nurse Call Option Item Part No. Part Name Qty. 3001–400–599 Handle Insert 4700–20–8 Outer Panel w/N.C. 23–112 Tapping Screw...
Page 133
5000–220–8 Optional Siderail Lumbar Module, Left Item Part No. Part Name Qty. 3001–400–524 Lumbar Module 3001–400–953 Switch Cap 5000–400–930 Lumbar Keypad PCB, Left 23–112 Tapping Screw 3001–400–522 Filler Cap...
Page 134
5000–220–10 Optional Siderail Lumbar Module, Right Item Part No. Part Name Qty. 3001–400–524 Lumbar Module 3001–400–953 Switch Cap 5000–400–920 Lumbar Keypad PCB, Right 23–112 Tapping Screw 3001–400–522 Filler Cap...
Page 135
5000–20–28 Optional TV Module, No Lumbar, Left Item Part No. Part Name Qty. 3001–400–524 Lumbar Module 3001–400–953 Switch Cap 5000–400–930 Lumbar Keypad PCB, Lt. 23–112 Tapping Screw 3001–400–522 Filler Cap...
Page 136
5000–20–29 Optional TV Module, No Lumbar, Right Item Part No. Part Name Qty. 3001–400–524 Lumbar Module 3001–400–953 Switch Cap 5000–400–920 Lumbar Keypad PCB, Rt. 23–112 Tapping Screw 3001–400–522 Filler Cap...
Page 137
5000–20–26 Optional TV Module with Lumbar, Left Item Part No. Part Name Qty. 3001–400–524 Lumbar Module 3001–400–953 Switch Cap 5000–400–930 Lumbar Keypad PCB, Left 23–112 Tapping Screw...
Page 138
5000–20–27 Optional TV Module with Lumbar, Right Item Part No. Part Name Qty. 3001–400–524 Lumbar Module 3001–400–953 Switch Cap 5000–400–920 Lumbar Keypad PCB, Right 23–112 Tapping Screw...
Wood Head Board Mounting Hardware Assembly part number 4700–31–20 (reference only) Item Part No. Part Name Qty. 23–92 Truss Hd. Screw 37–62 Hole Plug 58–65 Handle Crank Clip 4700–30–51 Frame Weldment, Left 4700–30–56 Frame Weldment, Right 4700–30–57 Push Handle End Cap 5000–30–270...
Page 141
5000–230–320 Motor Crank Handle Assembly Item Part No. Part Name Qty. 26–267 Spring Pin 5000–230–321 Crank Handle 5000–30–322 Crank End 5000–30–323 Crank Handle Collar...
4700–101 Optional 3–Stage I.V. Pole Mounting Ass’y HEAD END Item Part No. Part Name Qty. 3–226 Hex Washer Hd. Screw 4–199 But. Hd. Cap Screw 4–278 But. Hd. Cap Screw 16–36 Nylock Nut 1001–59–12 I.V. Clip (page 142) 3–Stage I.V. Pole Assembly 4700–30–23...
1211–211–10 Optional 3–Stage I.V. Pole Assembly Item Part No. Part Name Qty. 7–4 Truss Hd. Machine Screw 26–76 Roll Pin 52–17 Spacer 1211–210–31 2nd Stage Assembly 926–400–162 Spacer (page 143) 3rd Stage Assembly 1001–161–23 Base Tube 1010–259–16 I.V. Hook 1010–61–14 Collar (page 144) I.V.
Page 144
1211–110–32 3rd Stage Ass’y, 3–Stage I.V. Pole NOTE Item F, part number 1010–61–18 is left hand thread. When removing it, turn clockwise to loosen it. Item Part No. Part Name Qty. 31–21 Ball 38–303 Compression Spring 1010–61–13 Ball Retainer 1010–61–16 Retaining Shaft 1010–61–17 Thumb Knob...
Page 145
1211–210–26 Latch Assembly, Optional 3–Stage I.V. Pole Item Part No. Part Name Qty. 28–167 Retaining Ring 31–4 Steel Ball 38–392 Crest–to–Crest Spring 1211–91–34 Release Label 1211–110–18 I.V. Latch Seal 1211–110–20 Washer 1211–110–21 I.V. Latch Locking Pin 1211–110–22 I.V. Latch Guide 1211–110–24 I.V.
4700–40–21 Attachable/Storable Calf Rest Ass’y, Left Item Part No. Part Name Qty. Item Part No. Part Name Qty. 8–51 H. Soc. Hd. Sh. Bolt 1–97 H. Soc. Flat Hd. Screw 1060–1–155 Ball Post 8800–250–900 Int. Tooth Lock Washer 1060–1–157 Leg Support Mtg. Plate 5010–40–71...
Page 148
4700–40–22 Attachable/Storable Calf Rest Ass’y, Right Item Part No. Part Name Qty. Item Part No. Part Name Qty. 8–51 H. Soc. Hd. Sh. Bolt 1–97 H. Soc. Flat Hd. Screw 1060–1–155 Ball Post 8800–250–900 Int. Tooth Lock Washer 1060–1–157 Leg Support Mtg. Plate 5010–40–71...
4700–43 Optional Arm Board Assembly Item Part No. Part Name Qty. 8800–440–200 1” Hook Tape 12” 8805–897–900 Arm Board Pad 4700–43–1 Arm Board Mattress 5000–101–4 Arm Board...
Claim will be limited in amount to the actual replacement cost. In the event that this information is not received by Stryker within the fifteen (15) day period following the delivery of the merchandise, or the damage was not noted on the delivery receipt at the time of receipt, the customer will be responsible for payment of the original invoice in full.
Page 159
European Representative Stryker France Phone: 33148632290 BP 50040–95946 Roissy Ch. de Gaulle Fax: 33148632175 Cedex–France 6300 Sprinkle Road, Kalamazoo, MI 49001–9799 (800) 327–0770 DH 10/00 4700–008–000 REV A...