4K photo recording stops before finishing.
•
When the ambient temperature is high or recording with [
([4K Burst(S/S)]) of the 4K Photo function is performed continuously, the camera may
display [
] and stop the recording to protect itself. Wait until the camera cools down.
Recording motion pictures is not possible.
•
You may not be able to record for a short while after turning this unit on when using a
large capacity card.
Motion picture recording stops in the middle.
•
When the ambient temperature is high or motion picture is recorded continuously, the
camera may display [
cools down.
Sometimes it is difficult to focus with Auto Focus when recording 4K
motion pictures.
•
This phenomenon occurs when the camera is trying to record with highly accurate focus
at a reduced Auto Focus speed, and is not a malfunction.
The flash is not activated.
•
When the electronic shutter is used, the flash is not activated.
•
When [Silent Mode] is set to [ON], the flash is not activated.
The picture is not played back.
There are no recorded pictures.
•
Is the card inserted?
•
Is this a folder or picture which was processed in the PC?
If it is, it cannot be played back by this unit.
> It is recommended to use the software "PHOTOfunSTUDIO" (P68) to write pictures
from PC to card.
•
Has [Playback Mode] been set for playback?
> Change to [Normal Play].
] and stop the recording to protect itself. Wait until the camera
Others
] ([4K Burst]) or [
(ENG) SQT1310
]
75