Contents; Disc Storage & Management; Handling Cautions - Samsung bd-hm51 User Manual

1ZUse only with the c art,
stand, tripod, bracket,
or t able specified by the
manufacturer, or
s old
with the apparatus.
When a car, is used,
usecaution when
moving the caP/apparatus combination to
avoid injury from t p-over.
13. Unplug this apparatusduringlightning
storms or when unused for long
periods of time_
14. Refer all sere'icing to qualified service
pemonneL Sere'icing is required when
the apparatus has been damaged in any
way, such as when the powePsupply
cord or plug is damaged, liquid has
been spilled or objects have fallen into
the apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been droppe&
,, Holding Discs
- Fingerprints or scratches iiii :_-L:._
on a disc may reduce ':.
sound and picture quality or cause
skipping
- Avoid touching the sufiace of a disc
where data has been recorde&
- Hold the disc by the edges so that
fingerprints will not get on the surface_
- Do not stick paper or tape on the disc_
Cleaning Discs
- If you get fingerprints or _'/
dirt on a disc, clean it with
a mild detergent diluted in
water and wipe with a soft
cloth
- When cleaning, wipe gently from the
inside to the outside of the disc_
Disc Storage
, Do not keep in direct sunlight
, Keep in a cool ventilated area_
, Keep in a clean protection jacket
and store vertically_
Do not expose this apparatus to dripp ng
or splashing_ Do not put objects fled wth
I quids, such as vases on the apparatus_
-_oturn this apparatus off complete y, you
must pull the power plug out of the wall
socket Consequently, the powe plug must
be easiy and readily accessble at all times_
Do not plug mult pie electric devices into
the same wall socket Over oading a socket
can cause it to overheat, resu ting n a fire_
Before connecting other components to
this playe_, be sure to turn them of L
• If you move your p!ayersudden!y from a co!d
p!aceto a warm p!ace, condensaton may
occur on the operat ng parts and lens and
cause abnorma! disc p!ayback_ If ths occurs,
unplug the p!ayer,wait for two hours,and then
connect the p!ug to the power outlet Then,
nsert the disc, and try to p!ay back agan
If the product makes an abnormal noise or
produces a burning smel or smoke, turn
off the power switch immediately and
disconnect the power plug fn9m the wall
outlet Then, contact the nearest customer
service center for technical assistance_ Do
not use the pnoduct Using the product as it
is may cause a fire or an electric shock
© 2014 Samsung Electronics Co.,Ltd
Ail rights reserved; No pad. or whole of this
user's manual may be reproduced or copied
without the prior written permission of
Samsung Electronics Co.,Lt&
Contents
CONNECTIONS
Connecting to a TV ................................ 7
Connecting to an Audio System ............. 8
Connecting to a Network Router ............ 8
SE_INGS
The Initial Settings Procedure .................. 9
Menu Navigation ................................... 9
Accessing the Settings Menu ................ 10
Display Settings .................................... 10
Audio Settings ..................................... 11
Network Settings ................................. 12
System Settings .................................... 13
Language Settings ........................... 13
Security Settings . ............................ 13
General Settings ............................. 14
Support Settings .................................. 14
MEDIA PLAY
Playing a Commercially Recorded Disc_ 15
Playing Files on a USB Device ................ 15
Playing a Disc with User Recorded
Content ............................................... 15
Playi g Content Located on _Iour PC or
DLNA Device through the Blu-ray Disc
Player ................................................... 16
Controlling Video Playback ................... 16
Controlling Music Playback ................... 16
Playing Photo Contents ........................ 18
Using Netflix ........................................ 18
Using Pandora .............................. 19
Using You Tube .................................... 19
APPENDIX
Troubleshooting ................................... 21
Specifications ....................................... 22