Inserting The Bobbin - ALDI md15694 User Manual

GB IRE
Preparatory work
18
www.medion.co.uk

Inserting the bobbin

 Hold the bobbin between the thumb and index fi nger and leave
about 15 cm of the thread hanging out.
 Place the bobbin carefully into the bobbin cartridge so that the
thread is wound down from the bobbin and the bobbin turns
anticlockwise if you pull on the thread.
 Now pass the thread from right to left into the tensioning spring (slot
A).
 Now pull the thread through the notch B out and over the bobbin.
Leave around 15 cm of thread hanging out.
 Hold the end of the thread and close the bobbin cartridge cover
by fi rst placing the cover on the left side and then pressing down
until it clicks into place.
13
AFTER SALES SUPPORT
0333 32 13 106
GB
1 800 992508
IRE