HTC Inspire 4G Repair Manual page 4

•
You should now be able to remove the full motherboard assembly. Be careful nothing else is connected and
slowly work it away from the rest of the phone.
•
You will now need to heat the screen assembly using either a heat gun or hair dryer. Use quick movements, all
around the back and front of the assembly. This will take some time and may need to be reheated.
•
Use a pry tool, flat head screwdriver, or any thin piece of metal on the small hole ((red) has the bar codes, etc) on
the back of the assembly, you will need to release all of the very strong adhesive, holding the screen assembly in
place. This is the most tedious and important step and requires much time and patients.
Figure 2
Figure 3