1. Two additional 7/8-in. (22 mm) diameter holes are located in the top plate.
2. Minimum return-air openings at furnace, based on metal duct. If flex duct is used, see flex duct manufacturer's recommendations for equivalent diameters.
a. For 800 CFM-16-in. (406 mm) round or 14 1/2 x 12-in. (368 x 305 mm) rectangle.
b. For 1200 CFM-20-in. (508 mm) round or 14 1/2 x 19 1/2-in. (368 x 495 mm) rectangle.
c. For 1600 CFM-22-in. (559 mm) round or 14 1/2 x 22 1/16-in. (368 x 560mm) rectangle.
d. For airflow requirements above 1800 CFM, see Air Delivery table in Product Data literature for specific use of single side inlets. The use of both side inlets, a
combination of 1 side and the bottom, or the bottom only will ensure adequate return air openings for airflow requirements above 1800 CFM.
CABINET
WIDTH
FURNACE SIZE
IN. (mm)
0451412B
14−3/16 (360)
0701716B
17−1/2 (445)
0902116B
21 (533)
1102122B
21 (533)
1352422B
24−1/2 (622)
* 135 size furnace require a 5 in. or 6 in. (127 or 152 mm) vent. Use a vent adapter between furnace and vent stack.
2
Figure 1 − Dimensional Drawing
Table 1 – Dimensions − In. (mm)
A
B
OUTLET
WIDTH
IN. (mm)
12−9/16 (319)
15−7/8 (403)
19−3/8 (492)
19−3/8 (492)
22−7/8 (581)
Specifications are subject to change without notice.