Table of Contents
Advertisement
Instruction for how to log in UK-LINK DVR
This lesion is only suitable for the following model number:
UK-8204 with HDMI
UK-8208 with HDMI
Step 1: set the DVR ports and LAN IP, DDNS.
Connect all the power cable, BNC/VGA cable, USB mouse and so on.
On the desktop click right-click you will see the following page:
Click "SETUP":
1 / 9
Advertisement
Table of Contents
Summary of Contents for UK Link UK-8204
- Page 1 Instruction for how to log in UK-LINK DVR This lesion is only suitable for the following model number: UK-8204 with HDMI UK-8208 with HDMI Step 1: set the DVR ports and LAN IP, DDNS. Connect all the power cable, BNC/VGA cable, USB mouse and so on.
- Page 2 Click “NETWORK”: In this “NETWORK” page, 1 of all we need to set the following items: ITEM A: ports. They are SERVER PORT/IE PORT/MOBILE PORT. When we finish it we need to add these ports on the router. ITEM B: LAN IP/GATEWAY/PRIMARY DNS/SECONDARY DNS. This part must be the same configuration as router setting. After finishing the configuration for BASIC setting, we need to click “APPLY”...
- Page 3 You can see the ID in “USER NAME” bar. You will get the domain: dy.vip620.com You will get the DVR ID: xxxxxxxxxx 3 / 9...
- Page 4 Step 2: add the 3 ports inside the router. Open IE browser, input 192.168.1.1 to the browser bar, and then input both “admin” for the user name and password. Then click “OK”. Click the “Forwarding”: Click the “Virtual Servers” and then click “Add New…” to add new port to the DVR LAN IP: 4 / 9...
- Page 5 One time add one port, in the IP Address need to put the DVR LAN IP there, and need to select “ALL” for “Protocol”, and then click “Save”: We need to add the 3 ports in router; they are SERVER PORT/IE PORT/MOBILE PORT. 5 / 9...
- Page 6 Step 3: set the PC IE browser Open IE browser, open the properties interface for IE: Click “Internet Options” Click “Security” page 6 / 9...
- Page 7 Click “Custom level…” Roll to “ActiveX controls and plug-ins”, change all options into “Enable”. Here need to ignore the tips that system gives. Then click “OK”. 7 / 9...
- Page 8 Open the DVR via LAN computer. You need to install the plug-in as mentioned. After you install the plug-in, visit the DVR once again, and then need to click “Compatibility View”. DVR default user name and password is: User name 1: 1 Password: (empty) ...
- Page 9 Step 4: view on android/iPhone: For android: install the APK file named “CPlayer” from the CD For iPhone: open app store and search “CPlayer” and install After finish installation, just open it. For more lessons and more CCTV information, plz add my facebook: 2603145366@qq.com 9 / 9...