Table of Contents
Summary of Contents for Tube Technology FUSION CD64
-
Page 1: Users Manual
FUSION CD64 TRI-MODE CD PLAYER PLAYER/DAC/TRANSPORT ~USERS MANUAL~ Third edition published November 2002 © Tube Technology UK 2002 PART No. Fus/M-03-bd25 Printed in Great Britain ' Fusion ' & ' Tube Technology ' are Trademarks of Tube Technology UK... - Page 2 Introduction Thank you for selecting the FUSION CD Player from Tube Technology. Please read through this manual so you will know how to operate your Fusion properly. After you have finished reading this manual, please put it away in a safe place for future reference. We have done our utmost in the design and build of the Fusion to ensure you a low maintenance, trouble free CD Player that will bring you many years of pleasure as an important part of your...
-
Page 3: Table Of Contents
Contents Getting Started Unpacking your Fusion CD Player Mains Connection Connecting the Fusion to the Household Mains Supply Wiring a Mains Plug - UK Audio Connection Connecting the Fusion as a CD Player Connecting the Fusion as a D.A.C. Connecting the Fusion as a Transport Operating your System Operating the Fusion as a CD Player or Transport Operating the Fusion as a D.A.C. -
Page 4: Getting Started
Getting Started This chapter contains information on; Unpacking your Fusion CD Player Your Fusion CD Player is packed in "polystyrene" end-caps. Grip the unit from the middle Unpacking and simply pull it out of the box. Remove the end-caps and polythene bag. All packing should be retained. -
Page 5: Mains Connection
Mains Connection This chapter contains information on; Connecting the Fusion CD Player to the household mains supply. Wiring a mains plug (UK) Your Fusion CD Player plugs into the mains supply via the IEC socket located on the back Mains panel (see diagram 3). -
Page 6: Audio Connection
Audio Connection This chapter contains information on; Connecting the Fusion as a CD Player Connecting the Fusion as a D.A.C. Connecting the Fusion as a Transport Your CD Player uses high quality connectors to ensure that maximum signal transfer is possible, therefore ensure that all cables used for connection to the amplifier are terminated with connectors of similar quality. -
Page 7: Operating Your System
This chapter contains information on; Operating Operating the Fusion as a CD Player or Transport your System Operating the Fusion as a D.A.C. Controls & Remote Functions Diagram 2 INDEX STEP TRAC K 9 10 Front Panel 11 12 13 14 15 PROGRAM C D TEXT 16 17 18 19 20... - Page 8 > The track selected on the display will play. Pressing it again on the front PLAY panel during play will the disc. To release from Pause press on the Remote PAUSE II on the front panel. (9) PLAY/PAUSE This opens and closes the CD drawer. Place the CD in the tray blank side EJECT facing down, printed side face up.
- Page 9 Diagram 4 Display INDEX STEP TRAC K 9 10 11 12 13 14 15 16 17 18 19 20 PROGRAM C D TEXT PLAY - Illuminated when a disc is playing. PAUSE - Illuminated when the player is in PAUSE mode. - Indicates the track number selected.
-
Page 10: Installation
Dedicated racks are available for housing your tube equipment, contact your dealer or Tube Technology for further information. Do not locate the CD Player close to radiators or any other heat source, this could increase the operating temperature. -
Page 11: Maintenance
Maintenance This chapter contains information on; Care and Cleaning of your CD Player Vacuum Tubes Compact Discs Care & Handling Care & All polished metal parts on your CD player are un-lacquered. These metal parts will in Cleaning time lack lustre due to oxidisation. They can easily be restored to original condition by using a mild metal polish (such as duraglit) and a soft polishing cloth. -
Page 12: Troubleshooting
Symptom Remedy Troubleshooting No Power when the POWER button is 1. Check you have pushed the IEC mains cable depressed. firmly into the socket on the rear panel. 2. Check that MASTER POWER switch on the rear panel is in the ON position. Disc play does not start 1. -
Page 13: Specifications
Specifications SUMMARY 96 kHz 64 BIT CUSTOM PULSE ARRAY DAC Vacuum Tube Hybrid Output Stage 1 x Auto Sensing 32-96 kHz Optical Input 1 x Auto Sensing 32 -96 kHz Digital Coax Input 1 x 44.1 Optical Output 1x Optical Clock Lock Input (128 x Fs) 1 x Digital Coax Clock Lock Output (1xFs) 64 Bit WTA Digital Filter Surface Mount Technology throughout... -
Page 14: Guarantee
If a tube is found to be defective it should be returned to the dealer or failing this, directly to Tube Technology packed in its original packaging. Please complete the registration card and return it to Tube Technology. Your guarantee is Registration invalid without registration.
Need help?
Do you have a question about the FUSION CD64 and is the answer not in the manual?
Questions and answers