Setting The Transmitter Channels; Microphone; Bodypack - MC Crypt UHF-2032 Instruction Manual

Setting the Transmitter Channels

4 transmitting channels can be set for each transmitter. The channel settings at the transmitters and
at the receiver must be identical.

Microphone

• Switch off the microphone (push switch downwards).
• Screw off the casing bottom of the microphone
• Set the transmission channel at the microphone to the desired channel (0-3) with the DIP switches.
• Set the same channel at the receiver with the buttons
on the display (5).
• The display at the receiver can be switched with the CH/FREQ (3) button between the frequency display and the
channel display.

Bodypack

• Switch the body pack on (push button POWER/MUTE (2) briefly).
• Set the desired transmitter channel with the buttons  or  (5).
• Set the same channel at the receiver with the buttons
on the display (5).
• The display at the receiver can be switched with the CH/FREQ (3) button between the frequency display and the
channel display.
(4) or (6). The channel or the frequency is displayed
(4) or (6). The channel or the frequency is displayed
31