Summary of Contents for Audio Alchemy DMP-1
-
Page 1: Table Of Contents
Initial Setup and Basic Playback Legal Notifications Roon Ready Setup and Playback Warranty Information Maintenance Installation and Usage Tips Troubleshooting Connections and Controls Front panel Rear panel Optional remote Connecting the DMP-1 to Your System Power supply Ethernet connection USB connections Digital audio connections... -
Page 2: Legal Notifications
Audio Alchemy is a registered trademark of Audio Alchemy LLC. Information in this manual is subject to change without no- tice. The information in this manual is the sole property of Audio Alchemy. Any reproduction in whole or part without the ex- pressed written permission of Audio Alchemy is prohibited. -
Page 3: Installation And Usage Tips
■ Place the DMP-1 where it will not be exposed to moisture or direct sunlight. ■ Install the DMP-1 and its power supply where they can get some ventilation. They don't produce a great deal of heat, but using them in a sealed enclosure with no airflow could have long-term negative effects on the unit's circuitry. -
Page 4: Optional Remote
Connecting the DMP-1 to Your Audio System First, turn your power amp off. Do not connect the DMP-1's power supply until all audio connections have been made. Power Supply Connection: Stock Power Supply To connect the stock AC power supply that comes with the DMP-1, connect the power supply's cable to the coaxial AC power input on the upper right corner of the back of the DMP-1. -
Page 5: Ethernet Connection
USB Connections Any of the DMP-1’s USB jacks can be used as an input from a USB stick or drives, or as an output to connect to a DAC or digital preamp with a USB input. The two USB jacks on the left (when looking at the rear panel) have high-current 5-volt DC supplies that can power many USB hard drives. - Page 6 You can also use the track skip, play/pause and repeat controls on the optional remote. Note that these buttons do not function when the DMP-1 is used as a Roon endpoint (see next page).
-
Page 7: Roon Ready Setup And Playback
If you haven’t yet, download and install the Roon app on your PC or Mac. You can find it at roonlabs.com/downloads.html. In- stall the app as directed. Make sure the DMP-1 is powered on and connected to your network before you open the Roon app, and make sure your computer is connected to the network. -
Page 8: Maintenance
DMP-1 is Playing But No Sound Coming From DAC or Digital Preamp If a file is playing through the DMP-1’s webpage or the Roon app–i.e., if the cursor on the timeline is moving and the time indicator on the software is counting–check the following things in order: 1.