Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Voltronic Power Alfa DIY-2-BAT
- Page 1 Quick Guide Battery Bank 100Ah x 2 pieces Suitable for 3KVA Inverter Version: 1.0...
- Page 2 Package Contents: Overview: Max. dimension of each battery: 400mm x 173mm x 230mm (1 piece) (1 piece) For cascading battery banks, please order cable kit Top Case Bottom Case with wheel (1 piece) (1 piece) Left side Case Right side Case ...
- Page 3 Assembly Procedure 3. Fix two batteries on the bottom case with battery fix brackets by 4 1. Assemble right side case into three holes on bottom case with 3 pieces of M4 screws. Refer to chart below. pieces of M4 screws. Apply the same installation procedure to left side case.
- Page 4 5. Fix rear door between left and right cases. Refer to chart below. 7. Assemble cables as below. Cable #A is used to connect two batteries. Cable #B is used to connect to breaker and positive polarity of one battery. Cable #C is used to connect to breaker and negative polarity of the other battery.
Need help?
Do you have a question about the Alfa DIY-2-BAT and is the answer not in the manual?
Questions and answers