Summary of Contents for UV-technik EVG UVT 2x 100-200 W
-
Page 1: Operating Manual
UV-Technik Speziallampen GmbH, Gewerbegebiet Ost 6, 98704 Wolfsberg Operating Manual Electronic Power Supply EVG UVT 2x 100-200 W 1.2-2.1 A EVG UVT 2x 150-320 W 1.5-2.1 A EVG UVT 2x 150-320 W 1.8-2.9 A Stand: 07.07.2016... - Page 2 No parts of this operating manual may be reproduced in any form without the prior written permission of the UV-Technik Speziallampen GmbH. If any part of this user’s manual is reproduced, stored in a retrieval system or transmitted in any form or by any means without obtaining the prior written permission of the UV-Technik Speziallampen GmbH, this will be considered as an infringement of the copyright and legal action will be taken.
-
Page 3: Table Of Contents
Terminal diagram ............................. 13 Dimensional drawing ..........................13 9 Installation instructions ....................... 14 General sales and delivery conditions of UV-Technik Speziallampen GmbH are valid Provision of the manual is mandatory operating manual EVG UVT 200-480W subject to change without notice... -
Page 4: Warning Notes And Symbols In The Operating Instructions
General sales and delivery conditions General sales and delivery conditions of UV-Technik Speziallampen GmbH are valid Provision of the manual is mandatory manual is mandatory page 4 of 17... -
Page 5: Device And Function Description
· RS485 control as option General sales and delivery conditions of UV-Technik Speziallampen GmbH are valid Provision of the manual is mandatory operating manual EVG UVT 200-480W subject to change without notice... -
Page 6: Safety Instructions
· compliance with the relevant accident prevention regulations ATTENTION! UV-Technik Speziallampen GmbH is not liable for damage resulting from inappropriate use of the equipment. Staff obligation Before commencing work, all persons entrusted with work to be performed on the EVG UVT undertake the following: ·... -
Page 7: Hazards From Handling The Equipment
. The operator will have received these terms, at the latest upon signing the contract. The UV have received these terms, at the latest upon signing the contract. The UV-Technik Speziallampen GmbH is Technik Speziallampen GmbH is not liable for any damage to persons or property arising... -
Page 8: Informal Safety Measures
No repairs or changes to the equipment other than those described in this manual may be carried out. General sales and delivery conditions General sales and delivery conditions of UV-Technik Speziallampen GmbH are valid Provision of the manual is mandatory manual is mandatory... -
Page 9: Transport, Storage, Delivery
5 Repair Should the EVG UVT be damaged or defective in any way, you have to send the unit back UV-Technik Speziallampen GmbH for testing and/or repair! By opening the unit or by breaking the unit’s inspection seal, you lose any warranty claim! -
Page 10: Faults
- start without lamp to count the numbers of blinking, please count the dark phases or rising edges, e.g General sales and delivery conditions of UV-Technik Speziallampen GmbH are valid Provision of the manual is mandatory page 10 of 17... -
Page 11: Technical Data
General sales and delivery conditions of UV-Technik Speziallampen GmbH are valid Provision of the manual is mandatory operating manual EVG UVT 200-480W... -
Page 12: Monitoring Circuitry
The stated EMC standards apply only to single ballast and for cable length < 3 m. Since the ballast is a part of an installation it needs in most cases an extra EMC approval of the whole device and necessarily additional measures to reduce disturbances. General sales and delivery conditions of UV-Technik Speziallampen GmbH are valid Provision of the manual is mandatory... -
Page 13: Technical Documentation
Dimensional drawing depth EVG UVT 2x 100-200W: 105 mm depth EVG UVT 2x 150-320W: 150 mm General sales and delivery conditions of UV-Technik Speziallampen GmbH are valid Provision of the manual is mandatory operating manual EVG UVT 200-480W subject to change without notice... -
Page 14: Installation Instructions
Unavoidable noise interferences must be filtered with appropriate measures. Basically, the interference avoidance is preferable to interference elimination. General sales and delivery conditions of UV-Technik Speziallampen GmbH are valid Provision of the manual is mandatory... - Page 15 EVG UVT. Turn on active cooling when overheating threatens. Wait long enough while doing temperature tests to reach the thermal balance of the ballasts. This can take up to several hours. Try to keep the case General sales and delivery conditions of UV-Technik Speziallampen GmbH are valid Provision of the manual is mandatory...
- Page 16 The integral PFC regulates fluctuations in the supply voltage, so that there is no influence on the output power. Mains voltages out of specification cutoff the ballast and may cause damages. General sales and delivery conditions of UV-Technik Speziallampen GmbH are valid Provision of the manual is mandatory page 16 of 17...
-
Page 17: Electromagnetic Compatibility
In addition to the known technical contexts, all given instructions of this document are based on our experiences. We take no guarantee of completeness and correctness. General sales and delivery conditions of UV-Technik Speziallampen GmbH are valid Provision of the manual is mandatory...
Need help?
Do you have a question about the EVG UVT 2x 100-200 W and is the answer not in the manual?
Questions and answers