Control Panels; Let's Start To Use Your Oven - Panasonic NN-S454 Operation Manual

Control Panels

(1)
(2)
(3)
(4)
(5)
(6)
(8)
(9)
(10)
Beep Sound
When a pad is pressed correctly, a beep sound will be heard. If a pad is pressed and no beep is heard, the unit
did not or could not accept the instruction. The oven will beep twice between programmed stages. At the end of
any completed program, the oven will beep 5 times.

Let's Start To Use Your Oven!

1
Plug in
Plug into a properly earthed electrical outlet. " 88:88 " will appear in the Display Window. (This will
immediately cease when any pad is pressed.)
2
Open Door
Open the door and place container with food on Glass Tray in the oven. Then close the door.
3
Select Power Level
e.g. Med-High
Press Micro Power Pad three times.
(see page 8 for Micro Power chart)
4
Set Time
e.g. 1 minute 30 seconds
Press numbered Time Pads
Verify your selection(s) in the Display Window.
5
Press
CONTROL PANELS
(1) Display Window
(2) Time Pads
(3) Micro Power Pad (pg. 8)
(4) Auto Reheat Pad (pg.11)
(5) Frozen Reheat Pad (pg. 11)
(6) Turbo Defrost Pad (pg. 9)
(7) Auto Cook Pads (pg. 12)
(8) Timer Pad (pg. 13)
(9) Clock Pad (pg. 7)
(7)
(10) Stop/Reset Pad
Before cooking: One tap clears your instructions.
During cooking: One tap temporarily stops the cooking
process. Another tap cancels all your instructions and time
of day appears in the Display Window.
(11) Start Pad
One tap allows oven to begin functioning. If door is opened
(11)
or Stop/Reset Pad is pressed once during oven operation,
Start Pad must again be pressed to restart oven.
once
three times
– 6 –