Related Manuals for Craig CBH513-BK
Summary of Contents for Craig CBH513-BK
- Page 1 STEREO HEADSET STEREO HEADSET with Bluetooth Wireless Technology ® with Bluetooth Wireless Technology ® Owner's Manual PLEASE READ BEFORE OPERATING THIS EQUIPMENT. Model: CBH513-BK...
- Page 2 FCC INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide residential protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not Installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Page 3 Location of Controls 1. Power ON/OFF Switch 2. ＋ (Volume Up) Button 3. － (Volume Down) Button Button and Indicators (Skip Backward) Button (Skip Forward) Button (Play/Pause) Button 8. Micro USB Port (For charging only) Battery Recharge The unit has a built-in rechargeable Li-polymer battery , recharge it before use as follow: Open the cover on the Micro USB Port.
- Page 4 Notes: Your battery will last longer if you following these simple guidelines for charging and storing. For first time charge, charge it approximate 10 hours. Recharge and store the device within the temperature range of 5°C~35°C (40°F~95°F). Do not overcharge (longer than 24 hours). Excessive charging or discharging may shorten the battery’s life.
- Page 5 6. When finished listening, slide the Power ON/OFF Switch to OFF position to shut off the unit. Specification: Power source: …….......Built-in rechargeable Li-polymer battery. Recharge by 5V through Micro USB Port. Bluetooth Version: ..................Bluetooth 3.0 Operation Distance in open area:................32 feet Impedance of Earpiece: …………………………………………………...32 Ohm, 200mW x2 Audio Power.......................15mW Accessories：...
- Page 6 Under no circumstance shall Craig be liable for any loss or consequential damage arising out of the use of this product. This warranty gives specific legal rights. However, you may have other rights which may vary from state to state.
Need help?
Do you have a question about the CBH513-BK and is the answer not in the manual?
Questions and answers
How do I connect to my phone lost the manual
To connect your Craig CBH513-BK to your phone via Bluetooth for the first time, follow these steps:
1. Turn on the headset using the Power ON/OFF switch.
2. The device should enter Bluetooth pairing mode automatically.
3. On your phone, turn on Bluetooth and search for available devices.
4. Select the CBH513-BK from the list of available Bluetooth devices.
5. Once connected, you can use the headset for audio playback.
If the device does not enter pairing mode automatically, refer to the full manual for specific button combinations to initiate pairing.
This answer is automatically generated