Advertisement
Quick Links
Advertisement
Related Manuals for Zest LUXLINE Z2316
Summary of Contents for Zest LUXLINE Z2316
- Page 1 LUXLINE LUXLINE Strength equipment SERVICE MAINTAINENCE MANUAL MAY 2011...
- Page 2 To ensure that your Zest equipment provides the user a safe and opti- mal functionality and is kept in pristine condition, it is vital to establish a “Daily quick function & maintenance inspection in 11 steps”. This inspection is quick and easy to follow: DAILY QUICK FUNCTION &...
- Page 3 Inspect for loose nuts and bolts - tighten as required Bolts and nuts are secured with a spring washer, it is however essential (from a safety point of view) to ensure all bolts and nuts are tightened. Check the ease of functioning of the pull-pin or other methods of adjusting PULL-PIN ADJUSTMENT: The spring loaded pin should click in any location...
- Page 4 Check the cable slack before the weight-stack is lifted, if more then 15mm, cable should be adjusted Bolt Cable Bolt adjustment. Fine adjustment can then be done by turning the cable Locknut bolt on the weight-stack down to reduce the free move- ment.
- Page 5 This cleaner has been designed for surfaces containing grease, oils and stubborn This cleaner has been designed for surfaces containing grease, oils and stubborn dirt. Zest Surface Cleaner is a detergent and solvent based all-in-one and complies dirt. Zest Surface Cleaner is a detergent and solvent based all-in-one and complies well above all SABS 1344 requirements.
- Page 6 Do not use! Alcohol, acetone, organic solvents or scouring pads for cleaning Touch up paint is available for any sign of corrosion or to cover any deeper scratches contact Zest Service to order. As a side note - Exposure to extensive water vapour, chlorine and/or bromide can...
- Page 7 Schematic overview indicating the replaceable parts of a LUXLINE Z2316 Item Description Ref no. Item Description Ref no. Grommet 18 I/D M10 S/Steel Dome nut Collar S/Steel 32/20 x 15 Collar S/Steel 36/25 x 15 M8 x 8 mm Grub screw...
- Page 8 Schematic overview indicating the replaceable parts of a LUXLINE Z2205 Item Description Ref no. Item Description Ref no. Pulley assembly Feet covers Grommet 18 I/D M10x100 Allen cap + Dome nut Collar S/Steel 32/20 x 25 Swivel pulley (bottom) M8 x 8 mm Grub screw Handrail M24 Lock nut Nylon bush 42/35/25 x 22.5...
-
Page 9: Warranty
Notice: The information contained in this manual is subject to change without notice. Zest Manufacturing (Pty) Ltd. shall not be liable for errors contained herein or for inci- dental or consequential damages in connection with furnishing performance, or use of this manual. - Page 10 The Model and serial / asset no. can be found on the plate on the base of the unit. Any cable supplied by Zest as per given specification that is found to be incorrect on delivery will be at the cost to the client.
- Page 11 The Model and serial / asset no. can be found on the plate on the base of the unit. Any upholstered part supplied by Zest as per given specification that is found to be incorrect on delivery will be at the cost to the client.
Need help?
Do you have a question about the LUXLINE Z2316 and is the answer not in the manual?
Questions and answers