Kruger&Matz KM0814 Owner's Manual page 19

Owner's manual
Insert the AC adapter's DC plug into the
unit, then insert one side of AC power cord
into a wall outlet.
Caution:
Be sure to unplug the power plug from the
outlet when the unit is not in use for an
extended period of time.
Power On / Off
Press the power button
device on.
Standby mode
Press and hold the power button
switch the unit to standby mode. The time
(if set) appears on the display.
Set the Clock
1. In standby mode, press and hold the
SET button for 2 seconds, [00:00]
begins to blink on the display.
2. Set the hour with the P+ / P- buttons.
3. Press the SET button to confirm and
the minute digits begin to blink.
4. Repeat above steps 2-3 to set the
minute, year, month and day.
Note:
If no button is pressed in 60 seconds, the
unit exits clock setting mode automatically.
to turn the
to
19