Resetting Password To Factory Default - i3DVR International annexxus 300 series User Manual

Chapter 4. Appendix
Note
Custom settings with the exception of the
default login and password will not be reset
after the Authorization Code is submitted.

4.3.4. Resetting Password to Factory Default

If the Annexxus device's password is unknown or has been lost, it needs be reset to the factory default setting before
device's IP Address and Subnet mask configurations may be changed.
To reset the device's password, please follow the steps below:
1. Contact our technical support department at 1.877.877.7241 or by email at support@i3dvr.ca
2. Inform our technical support representative that the password for your Annexxus device needs to be reset. Write
down the Authorization Code provided to you.
3. Enter the Authorization Code obtained from our technical support representative into the corresponding field in
the Annexxus Finder window
4. Click the Submit button. The device's password will be reset to the factory default setting: 1234
93
Resetting Password to Factory Default