Samsung NX58K7850S SERIES User Manual page 40

Maintenance
To apply the graphite lubricant
NOTE
• Do not use a dishwasher to clean the racks.
• If a rack does not slide in and out smoothly, apply a few drops of cooking oil
to the oven rack guides.
• If a rack becomes too difficult to slide in or out, lubricate the rack.
• To purchase the graphite lubricant, contact us at 1-800-SAMSUNG (726-7864).
• For online shopping, visit http://www.samsungparts.com/Default.aspx and
search for part DG81-01629A.
40 English
1. Shake the graphite lubricant before
opening it.
2. Apply 4 drops of lubricant to the
inner side of the left sliding track, and
4 drops to the outer side of the left
sliding track.
Repeat step 2 above on the right sliding
3.
track.
4. Extend and collapse the gliding rack
several times to distribute the lubricant.
CAUTION
Do not leave racks in the oven during the self-cleaning cycle. The extreme
•
heat generated in this cycle can permanently peel off the rack coating and
make it difficult to remove the rack.
• Do not spray cooking oil or lubricant directly onto the gliding rack.
Door
Do not remove the inner gasket of the oven door for cleaning.
Inner side
• Inner surface: Clean the inner side of the door manually using a soapy plastic
scouring pad, and then wipe with a dry cloth. Take care not to get the gasket
wet or allow moisture into the door.
• Inner glass: The inner glass is cleaned automatically during the self-cleaning
cycle.
Outer side
• Outer surface: Follow the cleaning instructions for the stainless steel surface in
the previous section.
• Outer glass: Clean the outer glass using a glass cleanser or soapy water. Rinse
and dry thoroughly. Take care not to get the gasket wet or allow moisture into
the door.
*
CAUTION
• Do not let moisture enter the door or
contact the door gasket (*). Moisture
may reduce the gasket's performance.
• Do not let moisture or water enter the
burners, electrical controls, or switches.