Bose SOUNDTRUE ULTRA Owner's Manual page 15

Importance of proper fit
@For optimum audio performance, it is important to choose the
correct size
StayHea~
Ultra tip. Select the size that gives you
the best comfort and fit in each ear. You may need to try all
three sizes to determine the best fit. To test the fit, try speaking
aloud. Your voice should sound muffled in both ears. If not, select
another tip size. Each tip is marked with either an Lor an R.
Be sure to attach the left tip (L) to the left earpiece and the right
tip (R) to the right earpiece.
@)Fitting the headphone to your ear
The
StayHea~
Ultra tip allows the earpiece to rest comfortably in
the bowl of your ear. The wing part of the tip fits just under your
ear ridge. To determine if the tip is the right size:
1. Insert the headphone into the ear so the tip gently rests in the
opening of the ear canal.
2. Tilt the headphone back and press the tip wing under the
ear ridge until it is secure. The tips should fit comfortably yet
securely in the bowl of the ear.
e
Changing ear tips
1. Gently peel the edges of the attached tip away from the
earpiece, using care not to tear the tip.
CAUTION: To prevent damage, do not pull on the
StayHea~
Ultra tip wing.
2. Position the opening of the new tip over the nozzle and the
small slot over the nozzle hook.
3. Ease the base of the tip down around the base of the
earpiece until the tip feels secured.
Removing headphones: The eartip may form a tight seal inside the
ear. Use a slow, twisting motion to gradually break the seal before
removing the headphones.
Troubleshooting
Poor sound quality
• Make sure the headphone cable is securely plugged into the
headphone jack on the device.
• Try another eartip size. See "Importance of Proper Fit".
• Try another device or application.
Microphone not working
• Make sure you are using a compatible device.
See "Made for" on the product carton.
• Make sure the headphone cable is securely plugged into the
headphone jack on the device.
• Make sure the microphone opening on the back of the
Answer/End button is not blocked.
• Try another phone call.
• Try another device.
Device is not responding to (remote) button commands
• Make sure you are using a compatible device.
See "Made for" on the product carton.
• Make sure the headphone cable is securely plugged into the
headphone jack on the device.
• For multi-press functions: vary speed of button presses.
• Try another device.
For your records
The serial number is located on the warranty card included in the carton.
Serial number: _______________ _
Please keep your receipt with the owner's guide. Now is a good
time to register your headphones. You can do this easily by going to
http://globai.Bose.com/register
The warranty information provided with this product does not apply in Australia and New
Zealand. See www.Bose.com.au/warranty or www.Bose.co.nz/warranty for details.
iPad, iPhone, and iPod, are trademarks of Apple Inc., registered in the U.S. and other
countries. The trademark ''iPhone" is used with a license from Aiphone K.K.
"Made for iPod," "Made for iPhone," and "Made for iPad" mean that an electronic
accessory has been designed to connect specifically to iPod, iPhone, or iPad,
respectively, and has been certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards. Please note that the use of this accessory with iPod,
iPhone, or iPad may affect wireless performance.
©2015 Bose Corporation. No part of this work may be reproduced, modified, distributed,
or otherwise used without prior written permission.