Technika MP-408 User Manual page 26

Preset Mode: In this mode the radio accesses only those stations stored in the preset channels.
Press the ► ► I or I ◄ ◄ keys to change Radio Channels. The presets are accessed in Preset order, not frequency.
•
Scan Mode: Manually tune the band to find a station. Turn the volume down to minimise the effects of inter-station noise.
When tuning a station changing your position may give you better reception as the headphone cable is the antenna.
Press the ► ► I or I ◄ ◄ keys to tune up or down the FM band in 50 kHz increments.
•
If you press and briefly hold the ► ► I or I ◄ ◄ keys the tuner will search in the wanted direction. When a usable station is
•
found the search will stop and the station will play.
Changing Tuner Modes:
To change the Radio mode from "Scan" to "Preset": Follow the procedure below.
To change from "Preset" to "Scan" repeat the procedure but choose "Scan"
Press the MENU key
87.5 108
FM Radio - Scan and Preset Modes
Press V+/- to select
"Change Mode"
Press ► / II
FM Radio
Change Mode
Save Station
Auto Scan
FM region
FM record
Exit
Press ► ► I /I ◄ ◄
to select "Preset"
Press ► / II
FM Radio
Change Mode
Scan Preset
FM region
FM record
Exit
Press V+/- to select
"Exit"
Press ► / II
FM Radio
Change Mode
Save Station
Auto Scan
FM region
FM record
Exit

The Radio will go to
"Preset" mode
87.5 108
Preset