Panasonic Viera TX-37LZD850A Operating Instructions Manual page 27

Automatically retune all DVB or Analogue programmes received in the area.
•
Only DVB programmes are retuned in DVB mode.
•
Only Analogue programmes are retuned in Analogue mode.
Start Auto Tuning
Set all DVB
or Analogue
Auto Tuning
programmes
All digital tuning data will be erased
automatically
Start Auto Tuning
Auto Tuning
•
All the previous tuning settings are erased.
•
When the operation is completed, the programme at programme position "1" will be
displayed.
•
If tuning has not been done completely
Normally use "Auto Tuning" or "Add New DVB Services" to add DVB programmes to your
service list.
Set DVB
If tuning has not been done completely or for adjusting the direction of the aerial, use this
function.
programme
manually
DVB Manual Tuning
Physical Channel
Analogue Scan Signal Quality
Signal Strength
DVB Manual Prog.
Tuning
DVB: 0
Set Analogue programme manually after Auto Tuning.
•
If a VCR is connected only with the RF cable, select programme position "0".
Set Analogue
programme
Analogue Manual Tuning
1
manually Manual Tuning
Select the programme position
Analogue
Manual Tuning
Any new services found will be added to the DVB Service List.
Add DVB
programme Add New DVB Services
Scan Analogue Scan
automatically
This will take about 3 minutes.
RF Ch
Add New
DVB Services
DVB: 0
Display a
notifi cation Selects whether to give a notifi cation message when a new DVB service is found. (Off / On)
message
Press OK to add new service.
New Service
Message
Selects a programme and checks the DVB signal condition.
•
To change the programme
Check
DVB signal
DVB Signal
DVB Signal Display
Display
Service Name
Signal Quality
Signal Strength
EXIT
RETURN
[CH21]
21 0
0
Service Name Type
Pay TV: - Radio: - Data: -
0
21 6
Service Name Type
Pay TV: - Radio: - Data: -
Searching
New DVB service found!
Press EXIT to lgnore.
CH
[CH53] 7 7 Digital
0
0
Settings are made automatically
Auto Tuning - Digital (DVB)
Scan
This will take about 3 minutes.
RF Ch Service Name
2 ABC TV Sydney
3 SBS DIGITAL 1
4 FTV guide
7 7 Digital
CH 29
CH 33
DVB: 3
"DVB Manual Tuning", "Analogue Manual Tuning"
select channel
MHz
474,00
adjust frequency (set where the level of
10 68
10
"Signal Quality" becomes the maximum)
New
search
•
All services found will be added to the
DVB Service List.
CH33
75
Select the programme
CH
•
The new service is added with the current settings
68 69
saved as they are.
Quality
A good Signal Strength is not an indication of
suitable signal for DVB reception. Please use
the Signal Quality indicator as follows:
Signal Quality:
•
Green bar
•
Yellow bar
•
10
Red bar
10
6 69
Type Quality
DVB 10
DVB 10
DVB 10
DTV 10
Analogue
-
Analogue
-
Searching
Search and store
search
store
Good
Poor
Bad (Check the aerial)
27