Advertisement
Quick Links
Advertisement
Summary of Contents for H265 COMPANY TN-B200CE
- Page 1 2 Megapixel IP Box Camera 1080P @60fps User Manual ver.1.0...
-
Page 2: Safety Precaution
TN-B200CE user manual Safety Precaution We appreciate your purchasing TN series. Before installing the product, please read the following with care Make sure to turn off the power before installing TN-B200CE Do not install under the direct sunlight or in dusty areas. - Page 3 TN-B200CE user manual 1. Introduction About this manual This User Manual provides information on operating and managing the megapixel IP box camera. The Manual includes instructions of installation, operation and configuration of megapixel IP box camera as well as how to make troubleshooting.
-
Page 4: Quick Manual
TN-B200CE user manual System configuration using Internet Explorer High Reliability Reliable embedded system Product and Accessories TN-B200CE Quick Manual 4/73 2 Megapixel IP Camera Manual... -
Page 5: Video Out
TN-B200CE user manual Part Names and Functions Rear ○ ○ ○ 1 ○ ○ ○ 3 ○ ○ ○ Connector Function 1. Ethernet/802.3af Ethernet port/802.3af LED : Booting and system check 2. RESET Button Initialization of network setting 3. AUDIO IN Audio input 4. - Page 6 Remote Center (PC SW) One TN-B200CE.is installed at a site where video images are transmitted. A PC or a decoder is installed at a central location to receive and view the video images on an analog monitor. Audio and serial data are transferred in either direction.
- Page 7 In this configuration, a site can be monitored from many remote central locations. Although up to 64 PCs or decoders can be connected to one TN-B200CE in the real network environment, network bandwidth can limit the maximum connections. Functionally, the video monitoring system (VMS) software provided can replace the decoder.
- Page 8 TN-B200CE user manual VMS (Video Monitoring System) Remote Center Site Site Remote Center (Decoder) VMS (Video Monitoring System) is a Window-based remote monitoring program in order to monitor or control video, audio, and events in real time from several IP cameras or video servers. Please refer to the VMS User Manual for more in detail.
- Page 9 PT commands to the external equipment via the serial port. When a decoder system instead of PC client is connected to TN-B200CE the serial port and that of the decoder system works in pass-through mode. That is, data from at one port is delivered to the other...
- Page 10 TN-B200CE user manual Connecting Sensor and Alarm Connect sensor and alarm devices to corresponding terminals accordingly Check if it works Once the power is supplied to the camera, it will start booting. The system will boot up to an operating mode after approximately 40-60 seconds.
- Page 11 TN-B200CE user manual 3. System Operation Remote Video Monitoring There are two ways to monitor video when the center system and IP camera are connected. In order for a proper operation, an IP address must be set accordingly. Please refer to True Manager Manual enclosed with product for further details.
- Page 12 TN-B200CE user manual Video Select Select the Video stream to be viewed : Primary, Secondary, tertiary or quartic streaming. This camera is capable of dual streaming; primary streaming and secondary streaming..Video will be displayed according to the resolution set on video configuration. If dual streaming (“Use Dual Encode” Menu in Video page) is not activated, secondary video is not available ...
- Page 13 TN-B200CE user manual buttons of PTZ control Panel (In order to use digital zoom, select Digital zoom ON in the Camera tab) Stop Stop on-going action Focus Near, Focus Far, Auto Focus Adjust the focus of the lens Select Preset Set preset position and move to the specific preset position.
- Page 14 TN-B200CE user manual File Record Recording to an AVI file on Live View page is available. AVI files are generated in the specified folder or in a specified file name on the PC where web browser is running. 1. Press “Set” button to select a folder or create a new folder. Enter the file name on a filename field.
- Page 15 TN-B200CE user manual 4. Remote Configuration Using Web Browser Remote setting is available by using web browser. Enter IP address of camera and then a live view screen appears as below. Press Setup button located in the upper right area of the monitoring screen to go to the server setup.
- Page 16 TN-B200CE user manual Video & Audio Information The information provides current information regarding the settings for video and Audio 16/73 2 Megapixel IP Camera Manual...
- Page 17 TN-B200CE user manual Video Performance Calculation Shows the performance usage rate according to the value set at ‘Encode’ mode underneath. Input Frequency User can select NTSC type or PAL type Resolution Select video encoding solution. Scaling option is used when encoding resolution is different from input resolution. Without Scaling...
- Page 18 TN-B200CE user manual option, input video will be cut according to encoding resolution. On the other hand, if Scaling is selected, input video will be adjusted according to encoding resolution. Framerate Determine the maximum number of frames per second for the video stream.
- Page 19 TN-B200CE user manual High Profile The Primary profile for broadcast and disc storage applications, particularly for high-definition television application. Baseline Profile Primarily for low-cost applications that require additional data loss robustness, this profile is used in some videoconferencing and mobile application. This profile includes all features that are supported in the constrained baseline profile, plus three additional features that can be used for loss robustness.
- Page 20 TN-B200CE user manual Audio Algorithm Select the audio algorithm: G.711 or AAC G.711 and AAC from client to server direction are supported. Thus, bidirectional audio communication is supported. Bit rate Select the bitrate between 64Kbps and 128kbps when AAC is selected The sampling rate is fixed to 8KHz and 32KHz for G.711 and AAC respectively.
- Page 21 TN-B200CE user manual Output Output Format Select the format of output when Enable Preview is selected. Audio Output Audio Output: The input audio is transmitted to the encoder Loopback: Does not transmit the audio to the encoder. Audio input and output at the camera.
- Page 22 TN-B200CE user manual Image General 22/73 2 Megapixel IP Camera Manual...
- Page 23 TN-B200CE user manual Lens Lens mode DC : DC IRIS, AGC, and Sense up are used to automatically control the brightness level of screen Manual : When user use manual Iris lens. DC lens mode : user can select indoor mode or outdoor mode ...
- Page 24 TN-B200CE user manual Indoor : 3200K Base Mode Outdoor : 5800 K Base Mode AWC : It will not change color temperature when user does not want to change Day & Night The camera delivers color images during the day. As light diminishes below a certain level, the camera can automatically switch to night mode (Black &...
- Page 25 TN-B200CE user manual Live DPC mode/Static DPC mode Sensors could have defects for something wrong in the process of their storage or manufacturing process. Such defects are called dead pixels, which consist of two types: static dead pixel and dynamic dead pixel.
- Page 26 TN-B200CE user manual Adaptive Mode It will work likes Blend mode Noise filter. If there is a movement, 2D NR will work. If there is no movement, 3D NR will work. Edge enhancement Edge Enhancement is an image processing filter that enhances the edge contrast of an image or video in an attempt to improve its acutance(apparent sharpness) ...
- Page 27 TN-B200CE user manual Scheduling of the configurations Cells in the weekly/hourly schedule table can be set to appropriate configurations by clicking a specific cell or a cell for hour or a cell for a day of a week Mask Masks can be displayed in the video.
- Page 28 TN-B200CE user manual Network IP & Port Local Select the IP mode: Fixed IP or DHCP Depending on the selected mode, further configuration items comes as follows, IP Mode Selection Description Local IP Fixed IP address Fixed IP...
- Page 29 TN-B200CE user manual Obtain DNS server address automatically Get DNS server address automatically when IP mode is DHCP. Use the following DNS server address Enter the DNS server IP address; Primary or Secondary DNS server Domain Name System (DNS) is a database system that translates a computer's fully qualified domain name into an IP address.
- Page 30 TN-B200CE user manual Discovery UPNP By the setting UPNP to ON, it allows the discovery by the clients according to UPNP (Universal Plug and Play) protocol. Zeroconf By setting Zerodonf to ON, it allows the discovery by the clients according to zeroconf protocol.
- Page 31 TN-B200CE user manual One-way This IP camera provides two kinds of one-way (unidirectional) streaming based on UTP to clients; RTSP and MPEG-TS. Both are a kind of broadcasting where traffic from clients to a server is not generated at all.
- Page 32 TN-B200CE user manual File Name : Enter the file name that will be used as the name of the SDP file. Then, it can be accessed through http://ServerAddress/filename MPEG-TS is a standard format for transmission and storage of audio, video, and data,[7] and is used in broadcast systems such as DVB and ATSC.
- Page 33 TN-B200CE user manual SNMP Listen Port (0, 161, 1025 ~ 65535) The port is for connecting external device when system operates as a SNMP client. SNMP is not used by setting 0 value. SNMP Trap Destination IP Set the SNMP Trap Destination IP.
- Page 34 TN-B200CE user manual TrueDNS True DNS service is used in the mode. Systems can be registered on the website for True DNS service, http://ns1.truecam.net. A system will get a domain name of xxx.truecam.net. Please refer to user guide document for True DNS service.
- Page 35 TN-B200CE user manual IP filtering IP filtering is simply a mechanism that decides which types of IP datagrams will be processed normally and which will be discarded. 35/73 2 Megapixel IP Camera Manual...
- Page 36 TN-B200CE user manual E-mail E-mail Specify the information to send event information, when E-mail is selected as an event action. Server Address Enter an address of mail (SMTP) server Port Specify a port for SMTP operation (Port 25 is the default port in SMTP operation. If a different port is configured in the SMTP server, this ports needs to be changed accordingly.)
- Page 37 TN-B200CE user manual E-mail Test E-mail sending can be tested with this button. Please note that configured settings should be saved first by pressing Apply button before using E-mail Test function. One of the following messages will come as a result of the test.
- Page 38 TN-B200CE user manual Specify the information to upload event information, when FTP is selected as an event action. Server Address Enter an address of an RTP server to receive video files Port Specify a port for FTP operation (port 21 is the default port in FTP operation. If a different port is configured in the FTP server, this port needs to be changed accordingly.)
- Page 39 TN-B200CE user manual %MM : month %DD : day %hh : hour %mm : minute %ss : second %EVENT : event type (Sensor1, Motion, ...) %ADDR : address of the server (Domain name when DDNS is used. Otherwise IP address) “.avi”...
- Page 40 TN-B200CE user manual Continuous upload ‘ON’ allows video clips to be transmitted regularly regardless of occurrence of event. When this mode is activated, FTP upload by event is suppressed. Upload Duration Specify recording duration of a video clip to be transmitted. (max 300 sec.) ...
- Page 41 TN-B200CE user manual Upload Video Primary video and secondary, tertiary or quartic video (H.264 only), JPEG capture can be selected for uploading. Number of Frame Enter frame number of JPEG capture. (1 ~ 10) Capture Interval Select the interval of captured frame.
- Page 42 TN-B200CE user manual VPN IP Address Set IP address on VPN VPN Port Set the port on VPN VPN IP Address Set IP address on VPN Connecting Client IP Addresses that are currently connected to system are listed. (1) Indicates...
- Page 43 TN-B200CE user manual Event Notification Local When a decoder instead of a PC client is connected to an IP camera, one system becomes a Local system and the other a Remote system (Generally a system which is being used by the user is called as Local system).
- Page 44 TN-B200CE user manual On Video Loss Configure the actions when the video input signal is lost. Multiple actions can be set for a single event. On Motion Configure the actions motion is detected. Multiple actions can be set for a single event.
- Page 45 TN-B200CE user manual Audio Detection Silence Detection When silence is detected for a specified amount of time, it will work with event Sound Detection When sound is detected for a specified amount of time, it will work with event...
- Page 46 TN-B200CE user manual Sensor Type There are two sensor input ports on video server. Each of the sensor ports can be configured to the followings; Function Operation Not used NO (Normally Open) The port is normally open and activated when closed.
- Page 47 TN-B200CE user manual <General> Settings in General tag configures parameters of video analytics operation which are applied commonly to all functions: Line Crossing, Intrusion, and Tampering. Sensitivity Configures the sensitivity in object detection: the larger, the more sensitive. 47/73...
- Page 48 TN-B200CE user manual Mode Configures where the target scene will be indoor or outdoor. Color check Configures if color property will be used in video analytics. Normally ‘On’ is recommended. Tracker type Configures internal algorithm of object detection and tracking. Due to performance issues, ‘Simple’...
- Page 49 TN-B200CE user manual <Intrusion> Region for intrusion detection is drawn the configuration. When objects enter into the region, events are generated accordingly. Object size Defines the size of object to be detected. Size is defined as the percentage of object against the video size.
- Page 50 TN-B200CE user manual When enabled, camera tampering such as covering the lens with a towel is detected and events are generated accordingly. 50/73 2 Megapixel IP Camera Manual...
- Page 51 TN-B200CE user manual Record General Use record Off : Recording function will not be used when “OFF” is selected. Use Disk : Use disk function will follow the setting of Schedule table which set as record off as a default.
- Page 52 TN-B200CE user manual when Automatically Backup to FTP is used. Start Time of Backup Data Specify the time of the data in the disk from which Backup to FTP Disk is performed. This time is changed automatically as the backup to FTP server goes. So it is useful to check current backup status.
- Page 53 TN-B200CE user manual Schedule Event Type Three recording modes are supported: Continuous, Event, Disconnect. In case of Event recording, event types can be selected among several events. Selected event type is used for configuring the schedule table. Up to 4 event types can be configured and each event type can be a combination of sensor, video loss and motion event.
- Page 54 TN-B200CE user manual Continuous Records continuously Disconnect Recording is started when the system loses the connection to its last client(Decoder, VMS/NVR) etc. When there are multiple clients and one of the client is disconnected, this doesn’t happen. ...
- Page 55 TN-B200CE user manual 55/73 2 Megapixel IP Camera Manual...
- Page 56 TN-B200CE user manual Search Page Recorded video and audio data can be saved as AVI format in the disk. In general, one AVI file is created for an event in case of event-based recording. However, it is possible that recorded data by serious of events happening continuously can be merged to a single AVI file depending on pre/post event time setting.
- Page 57 TN-B200CE user manual Playback 1. Selecting an AVI file will show a dialog for opening or saving the file 2. Pressing Save button, the file will be stored in the PC. The AVI file can be played with Windows Media Player.
- Page 58 TN-B200CE user manual Device Information The information provides current serial communication status Serial Serial Protocol This camera supports one RS-485 serial port. Serial Port Configuration The serial ports can be configured as follows; Each of the serial ports configurations must be same as the connecting device.
- Page 59 TN-B200CE user manual General PTZ Type Select the type of PTZ camera or receiver. PTZ ID Since it is possible to control multiple PTZ cameras or receivers over a single control line, each camera or receiver will be assigned with unique ID. Enter PTZ ID of a camera or receiver for control.
- Page 60 TN-B200CE user manual Preset Max 128 preset positions can be defined. Select Preset Number: Select an entry in the list to be assigned to current camera position. Focus Mode: Select the focus mode after preset Goto is executed.
- Page 61 TN-B200CE user manual Group This function is that the camera memorizes the combination of Presets, Pattern and/or Swings sequentially and runs Presets, Pattern and/or Swings repetitively on activation. Max 8 groups are programmable. Each group can have max 20 actions which are the combinations of Preset, Pattern and Swing.
- Page 62 TN-B200CE user manual 1. Select one of the entries of Group 2. Press Modify Group button. The following window will appear. 3. Set Action, Dwell Time and Option and click Enable squares 4. Press Apply button and the Group can be used on the Live View Page...
- Page 63 TN-B200CE user manual Advanced Advanced .Power Up Action Specify if the camera will continue previous action such as pattern, swing or group after it is rebooted by power. Group-1: When it will reboot, start to Group-1 Preset-1: When it will reboot, start to Preset-1 Off: Moves to the initial position after rebooting.
- Page 64 TN-B200CE user manual Direct OSD (ONLY PT System) 360 degrees panoramic shot User can select areas where for putting in OSD Range # - In: According to coordinate value, user can see specific OSD. Range # - On: regardless of coordinate value, user can see specific OSD.
- Page 65 TN-B200CE user manual User User List User can be registered and privilege level of a user can be specified. User configuration is allowed only to admin user. Max 16 users can be registered and each user can have one of four privileges.
- Page 66 TN-B200CE user manual Delete User Select the User to be deleted and press Delete button. Change Password Press Modify Password button. The following window will appear. Enter the current password and then set a new password. Modify Privilege Level Press Modify Privilege button to change User level.
- Page 67 TN-B200CE user manual Login Policy Login Policy Skip Login provides for convenient access to the server when authentication is not required. When Skip Login is set to Enable, login step is skipped. The privilege level after login in this way is determined by the setting of Privilege Level After Login Skipped.
- Page 68 TN-B200CE user manual System Information System information Followed network information is displayed (Read only) Model Display the model name. Version Display the current firmware version. Mac Address Display the MAC address of the camera. In case the camera is registered at DDNS server, the MAC address is used in DDNS registration.
- Page 69 TN-B200CE user manual Upgrade&Reboot Firmware Version : Display the current firmware version Upgrade: To upgrade firmware; 1. Press Browse button to select a firmware file from PC. 2. Press Firmware Upgrade button to start upgrading. 3. A message for showing status (downloading / upgrading) will be displayed.
- Page 70 TN-B200CE user manual Reboot Reboot the camera Do not press the Reboot button unless the server needs a reboot. Factory Reset All settings including user accounts and logs are cleared Factory Reset Except Network Settings All settings except for current network settings are changed to the default values.
- Page 71 TN-B200CE user manual A time zone is a region of the earth that has uniform standard time, usually referred to as the local time. By convention, time zones compute their local time as an offset from UTC (Coordinated Universal Time). In casual use, GMT (Greenwich Mean Time) can be considered equivalent to UTC.
- Page 72 TN-B200CE user manual System ID Enter System ID that is used as a camera title. The set System ID is displayed with video image on a Web Browser. The System ID is also transferred to remote software, such as VMS, and displayed on it.
- Page 73 TN-B200CE user manual Language Language Select the language to be used for web-based configuration. 73/73 2 Megapixel IP Camera Manual...