Interfaces - Juniper NS-5400-P00A-S00 Manual

The module allows concurrent Admin users, either in a User Role or in a Read-
Only Role.
The root administrator can create a virtual system (vsys) administrator for each
vsys, if the device has multiple virtual systems configured. The vsys administrator
can function in either the "user" role or "read-only" role. A virtual system is the
architecture that enables the device to respond with a different set of
configurations for each vsys administrator. Therefore, a single box can appear to
be several logical "virtual systems."
The NetScreen-5400 provides the following services:
The NetScreen-5400 supports both role-based and identity-based authentication.
D. Interfaces
Juniper NS-5400 Security Policy
•
Clear/Delete: Clear dynamic system info
•
Exec: Exec system commands
•
Exit: Exit command console
•
Get: Get system information
•
Ping: Ping other host
•
Reset: Reset system
•
Save: Save command
•
Set: Configure system parameters
•
Trace-route: Trace route
•
Unset: Unconfigure system parameters
•
All roles can be authenticated locally (within NS-5400); optionally,
the module supports authentication via a RADIUS server for only the
User role. Authentication by use of the RADIUS server is viewed as
role-based authentication; all other methods of authentication are
identity-based.
•
All other forms of authentication (local database) are classified as
identity based.
•
The module supports identity-based authentication for the Crypto-
Officer (local database), the User Role (local database), the Read-
Only User Role (local database), VSYS User Role, and VSYS Read-
Only User Role.
•
The NetScreen-5400 can accept up to three of two network interface
cards.
The network interface card options are:
1. 8GSPM: The 8GSPM provides eight Gigabit Ethernet mini-Gigabit
Interface Converter (GBIC) ports (labeled 1-8) using hot-swappable
transceivers. The 8GSPM delivers up to 4 Gigabits per-second
(Gbps) of firewall and up to 2 Gbps of Virtual Private Network (VPN)
capacity.
6