Quick Start Guide - Panasonic Viera TX-23LX60F Operating Instructions Manual

Quick Start Guide

1
Connection and setting up options
Please ensure that the unit is disconnected from the mains
before attaching or disconnecting any leads.
2
Connect the mains plug to the wall sock et.
Press the [ ] switch on the TV set to turn the
set on.
To switch the TV set to Standby mode, press
the button on the remote control.
The TV set can be switched on by pressing the
button again if it was in Stand by mode.
Note:
This TV will still consume some power as long
as the mains plug is still inserted into the wall
socket.
Remote control signal sensor
RF cable (Not supplied)
Plug in aerial and connect ancillary equipment.
Power Indicator
Standby : Red
On : No Light
Red light indicates Standby mode.
When using remote control, this indicates the
TV has received a command.
RF cable
(Not supplied)
SET TOP BOX
Scart cables
(Not supplied)
VCR / DVD
Recorder OR
OK
1 2 3
4 5 6
7 8 9
C 0
N
TV
5