Work Sharp WSKTS User Manual page 6

• Use clamps or another practical way to secure and support the
work piece to a stable platform. Holding the work by hand or
against your body leaves it unstable and may lead to loss of control.
• Avoid prolonged contact with dust from power sanding, sawing,
grinding, drilling, and other construction activities. Wear
protective clothing and wash exposed areas with soap and water.
Allowing dust to get into your mouth, eyes, or lie on the skin may
promote absorption of harmful chemicals.
SAFETY GUIDELINES — DEFINITIONS
It is important for you to read and understand this manual. The
information it contains relates to protecting YOUR SAFETY and
PREVENTING PROBLEMS. The symbols below are used to help you
recognize this information.
• DANGER!
not avoided, will result in death or serious injury.
• WARNING!
not avoided, could result in death or serious injury.
• CAUTION!
not avoided, may result in minor or moderate injury.
CAUTION:
Used without the safety alert symbol (•) indicates a
potentially hazardous situation which, if not avoided, may result
in property damage.
The label on your tool may include the following symbols.
V . . . . . . . . . Volt
Hz . . . . . . . . Hertz
min . . . . . . . minutes
. . . . . . direct current
. . . . . . . Class II Construction
•
. . . . . . . safety alert symbol
6
Indicates an imminently hazardous situation which, if
Indicates a potentially hazardous situation which, if
Indicates a potentially hazardous situation which, if
A . . . . . . . . . amperes
W . . . . . . . . watts
. . . . . . . . alternating current
. . . . . . . . earthing terminal
rpm . . . . . . . revolutions or
reciprocations per minute
Work Sharp Knife & Tool Sharpener