Panasonic Viera TH-42PX7A Operating Instructions Manual page 11

How to Use Menu Functions
Menu list
Menu Item
Controls the connected Panasonic equipment
VIERA Link Control
"Easy control only with VIERA remote control" (p. 31)
"Speaker control" (p. 31)
•
You can also access VIERA Link Menu directly using the VIERA Link button on the
Speaker Selection
remote control.
Basic picture mode (Dynamic / Normal / Cinema)
•
Viewing Mode
Set for each input signal
Contrast, Brightness,
Adjusts colour, brightness, etc. for each picture mode to suit your taste
Colour, Sharpness
Adjusts tint of image
•
Tint
For NTSC signal reception only
Colour Balance Chooses the colour balance of the entire image (Cool / Normal / Warm)
Automatically adjusts colours to vivid ones (Off / On)
Colour Management •
Not valid on PC signal
Picture Noise Reduction
P-NR Automatically reduces unwanted picture noise (Off / Normal / Dynamic / Auto)
•
Not valid on HDMI, PC signal or DVB
MPEG NR Automatically reduces noise for watching DTV, DVD and VCD (Off / Min / Mid / Max)
Automatically makes still pictures and slow pictures look more vivid (Off / On)
•
For PAL or NTSC signal reception only
3D-COMB •
Not valid on S-Video, components, PC and HDMI
•
Cannot be used with DVB
Reset Picture Defaults Press the OK button to reset the present Picture Mode to the default settings
Mode Basic sound mode (Music / Speech)
Bass Adjusts the output level of deep bass
Treble Adjusts the output level of high-pitch, shrill sound
Balance Adjusts volume level of right and left speakers
Surround Surround sound settings (Off / On)
Volume Correction Adjusts volume of individual channel or input mode
Selects the initial setting for Audio tracks (Dolby Digital / MPEG)
If programme has both Dolby Digital and MPEG audio tracks, priority is given to what you select
Dolby Digital : A method of coding digital signals developed by Dolby Laboratories. Apart
DVB Audio
Preference
MPEG :
•
DVB mode only
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
terminal (Auto / PCM)
SPDIF Selection Auto: Dolby Digital is output as Dolby Digital Bitstream. MPEG is output as PCM.
PCM: Dolby Digital is output as PCM. MPEG is output as PCM.
•
DVB mode only
Normally, MPEG sound is larger than Dolby Digital one
You can adjust the audio level of MPEG as the initial setting
•
MPEG Audio Level
0dB to -12dB in -2dB reductions
•
DVB mode only
Select to fi t the input signal (Auto / Digital / Analogue) (p. 29)
Auto
HDMI Input
Digital
Analogue : HDMI-DVI adapter cable connection
•
HDMI input mode only
Reset Sound Defaults Press the OK button to reset the present Sound Mode to the default settings
20
Adjustments / Confi gurations (alternatives)
from stereo (2ch) audio, these signals can also be multi-channel audio.
An audio compression method that compresses audio to small size
without any considerable loss of audio quality.
: Automatic detection of digital or analogue sound source
: HDMI cable connection
Menu list
Menu Item Adjustments / Confi gurations (alternatives)
DVB Favourites Edit
Creates list of favourite programmes (p. 23)
Auto Tuning Automatically sets the channels received in the area (p. 24)
Analogue
Edits analogue channels (p. 25)
Programme Edit
DVB Manual
Sets the DVB channels manually (p. 25)
Tuning
Analogue
Sets the analogue channels manually (p. 25)
Manual Tuning
Add New DVB
Adds new DVB services (p. 25)
Services
New Service
Selects whether to give a notifi cation message when a new DVB service is found (p. 25)
Message
DVB Signal
Checks the DVB signal condition (p. 25)
Display
Off Timer Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Teletext
Teletext display mode (TOP (FASTEXT) / List) (p. 16)
Shipping Condition
Resets all settings, for example, when moving house (p. 26)
System Update Downloads new software to TV (p. 23)
Power Save
Reduces brightness of picture to economise on power consumption (Off / On)
Increases the brightness of the side panel (Off / Low / Mid / High)
Side Panel
•
The recommended setting is "High" to prevent panel "image retention"
Input Labels Labels or skips each input terminals (p. 27)
Banner Display
Sets how long the information banner (p. 11) stays on screen
•
0 (No display) to 10 sec. in 1-sec. increments
Timeout
VIERA Link Sets to use VIERA Link functions (Off / On) (p. 30)
Power off Link Set to "Set" to use Power off Link function (No / Set) (p. 31)
Power on Link
Set to "Set" to use Power on Link function (No / Set) (p. 31)
Selects the region where you live to adjust the standard time (NSW/ACT / Victoria /
Region Select
Queensland / South Australia / Western Australia / Northern Territory / Tasmania)
(p. 23)
Select time offset from the standard time for Summer Time
Daylight Saving Time
(Auto / Off / +1/2 Hr / +1 Hr) (p. 23)
•
Set to "Auto" normally
Changes the image processing of the panel (depending on the input signal) (50Hz / 100Hz)
Refresh Rate •
Set to "100Hz" normally
Software Licence
Displays the software licence information
System Information Displays the system information of this TV
•
A different menu will be displayed while PC or DVI to HDMI adapter cable is used.
•
Only available items can be selected.
(p. 28 and p. 29)
21