Do you have a question about the NO.UJ374 and is the answer not in the manual?
Questions and answers
Sarah
March 9, 2025
How to pair the controller?
1 comments:
Mr. Anderson
May 14, 2025
To pair the YIBOO NO.UJ374 controller, follow these steps:
1. Turn on the controller: Press and hold the power or home button until the LED indicator starts flashing. This indicates the controller is in pairing mode.
2. Enable Bluetooth on your device: On your phone, tablet, PC, or console, go to Bluetooth settings and turn Bluetooth on.
3. Search for devices: In your device’s Bluetooth settings, search for new devices.
4. Select the controller: When "YIBOO NO.UJ374" or similar appears in the list, tap or click on it to pair.
5. Wait for confirmation: The LED light on the controller will become solid (not flashing) once the pairing is successful.
If a pairing code is requested, try entering "0000" or "1234".
Note: If your controller supports multiple modes (e.g., Android, iOS, PC), make sure it is in the correct mode before pairing. This is usually done by holding a specific button combination while turning it on. Check the instructions for the correct combination.
Need help?
Do you have a question about the NO.UJ374 and is the answer not in the manual?
Questions and answers
How to pair the controller?
To pair the YIBOO NO.UJ374 controller, follow these steps:
1. Turn on the controller: Press and hold the power or home button until the LED indicator starts flashing. This indicates the controller is in pairing mode.
2. Enable Bluetooth on your device: On your phone, tablet, PC, or console, go to Bluetooth settings and turn Bluetooth on.
3. Search for devices: In your device’s Bluetooth settings, search for new devices.
4. Select the controller: When "YIBOO NO.UJ374" or similar appears in the list, tap or click on it to pair.
5. Wait for confirmation: The LED light on the controller will become solid (not flashing) once the pairing is successful.
If a pairing code is requested, try entering "0000" or "1234".
Note: If your controller supports multiple modes (e.g., Android, iOS, PC), make sure it is in the correct mode before pairing. This is usually done by holding a specific button combination while turning it on. Check the instructions for the correct combination.
This answer is automatically generated