Description; Tx1500 Components; Product Codes - BBV TX1500 Installation Manual

OVERVIEW
The TX1500 is a video matrix and telemetry control system offering control of up to 96 cameras from 4 control
positions. Eight monitor outputs are provided with monitors 1,2,3 & 4 having on screen display.
BBV & VISTA up-the-coax and BBV 422 & VISTA 485 linked receivers and domes can be controlled when
viewed on any monitor. Pelco and VCL up-the-coax control is limited to monitors 1-4.
Monitor outputs tested via CRT Monitors, recommended maximum cable (RG59) distance from matrix = 25 meters.
TFT Monitors may require additional amplification.
Site alarms and contacts are handled with alarm cards, each providing 16 inputs. Up to 6 alarm cards can be linked
into the TX1500 system either locally or remotely offering 96 alarm inputs
The TX1500/BBUS-IF interface, which appears as another Keypad, gives off-site control, via video/data transmission
equipment, and local control from PC and other equipment. The interface can be controlled using either the TX1000 or
TX1500 control protocol via either RS232 or RS422.
The TX1500 matrix communicates with all Keypads, alarm cards and BBUS-IF interfaces via a polled 4-wire multidrop
RS422 control bus named BBUS.
The matrix itself is in a subrack which can be fitted to a 19" rack using supplied fixing brackets. The fixing brackets
can be mounted on the front or rear face of the subrack. By fitting the ears on the back of the subrack, it can also be
wall mounted.
Alarm cards, BBUS-IF and StarCards are supplied in 1U sub racks as standard or can be fitted into the subrack with
the matrix if specified when ordering.
Larger subracks than standard can be supplied if specified when ordering.

PRODUCT CODES

TX1500/16/8
TX1500/32/8
TX1500/48/8
TX1500/64/8
TX1500/80/8
TX1500/96/8
TX1500/KBD
TX1500/AL16
TX1500/BBUS-IF
STARCARD
STARCARD/CONVERTER
EXPANDING AN EXISTING SYSTEM on site (maximum of 96 camera inputs)
The TX1500 can be expanded to a maximum of 96 cameras.
Larger subracks are inculed when required nesserary. All the cards from the existing subrack must be transferred to
the new subrack. Note down and put somewhere safe all the external connection information to aid re-commissioning
the system.
PRODUCT CODES
TX1500/EXP16/17-32/MK2
TX1500/EXP16/33-48/MK2
TX1500/EXP16/49-64/MK2
TX1500/EXP16/65-80/MK2
TX1500/EXP16/81-96/MK2
3U TX1500/3U-SUBRACK
5U TX1500/5U-SUBRACK
7U TX1500/7U-SUBRACK
TX1500 Manual V4.1 Oct 2011.doc
16 camera, 8 monitor matrix inc Keypad (supplied in 3U subrack)
32 camera, 8 monitor matrix inc Keypad (supplied in 3U subrack)
48 camera, 8 monitor matrix inc Keypad (supplied in 5U subrack)
64 camera, 8 monitor matrix inc Keypad (supplied in 5U subrack)
80 camera, 8 monitor matrix inc Keypad (supplied in 7U subrack)
96 camera, 8 monitor matrix inc Keypad (supplied in 7U subrack)
Keypad with 3-axis joystick
16 input alarm card, volts free normally closed inputs
BBUS Interface to allow control from a PC or other 3
StarCard with 8 x RS422/485 outputs to allow star wired telemetry
As STARCARD with built in protocol conversion to allow control of domes etc.
16 video input card to expand from a 16 camera to 32 camera system
16 video input card to expand from a 32 camera to 48 camera system
16 video input card to expand from a 48 camera to 64 camera system
16 video input card to expand from a 64 camera to 80 camera system
16 video input card to expand from a 80 camera to 96 camera system
Page 4 of 32
rd
party equipment
TX1500 MATRIX