Panasonic TC-26LE60 Operating Instructions Manual page 15

Resets all picture adjustments to factory default settings except for "Other adjust"
Basic picture mode (Vivid/Standard/Cinema) (p. 41)
Adjusts luminance of the back light.
Adjusts color, brightness, etc. for each picture mode to suit your
taste
Selects level of warm colors (red) and cool colors (blue) (Warm/Cool/Normal)
Controls dark areas without affecting the black level or brightness in the overall picture (On/Off)
Adjusts vertical alignment and size when aspect setting is "ZOOM" (p. 40)
Reduces noise, commonly called snow. Leave off when receiving a strong signal. (On/Off)
Minimizes noise and cross-color in the picture. (On/Off)
Not valid on component and HDMI.
Selects image resolution of component-connected devices (SD/HD)
SD: normal vision HD: high-definition vision
Only 480 p signal accepted; regular TV (NTSC) is not available.
Select Dark or Light depending on the picture conditions. (Dark/Light)
The dark scene becomes easy to see. (Valid only for external input signals.)
Reset Bass, Treble and Balance adjustments to factory default settings.
Increase or decrease the bass response.
Increase or decrease the treble response.
Emphasize the left / right speaker volume.
Equalize overall volume levels across all channels and VIDEO inputs. (On/Off)
Enhances audio response when listening to stereo. (On/Off)
Selects according to the signal when HDMI is connected (Auto/Digital/Analog)
Auto: Automatically selects Analog / Digital signal
Minimizes volume disparity after switching to external inputs
Automatically turns off the TV after a pre-selected amount of time.
Timer setting is also possible by pressing the "Sleep" button on the remote control. (p. 10)
Locks the channels and programs (p. 16-17)
Selects channels to be displayed when pressing "Channel up/down" buttons. (Fav./All)
Fav.: Only channels registered as Favorite (p. 19)
Selects the screen menu language (p. 9)
Sets receiving channels. (p. 18-19)
Displays labels of external equipment (p. 13)
Displays subtitles (Closed Caption) (p. 13)
Sets how to power on the TV. (Set/Off)
Set : Connect power cord plug to Cable box etc. and control TV's On/Off on the connected
equipment. (The Sleep Timer will not function if Auto power on is set.)
Off : Supply Power from wall outlet and control TV's On/Off on TV side.
("First time setup" menu is displayed when power cord plug is re-inserted after removing it
from the wall outlet.)
To prevent howling and image oscillation, stops output of the pictures and audio specified in this
menu. (p. 23) (Off/Comp./HDMI/Video 1/Video 2/Video 3)
Comp./HDMI cannot output video signals regardless of "Prog-out stop" setting.
Controls equipment connected to HDMI terminals. (p. 21, 22) (On/Off)
Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a dark room
(Standard/Saving)
Displays TV version and software license.
Performing Reset will clear all items set with Setup, such as channel settings. (p. 18) Use Reset with care.
•
In VIDEO mode, the Audio menu and Setup menu give a smaller number of options.
Adjustments/Configurations (alternatives)
Picture
+20
Brightness
0
Color 0
0/30/60/90 (minutes)
Normal Set
Pic. mode Standard
Back light +20
Tint
0
Sharpness
0
Color temp Cool
AI picture
On
Zoom adjust On
Video NR Off
3D Y/C filter Off
Color matrix SD
Black level Light
Normal Set
Bass + 4
Treble 0
Balance 0
AI sound On
Surround Off
HDMI in
Auto
Audio leveler 0
Sleep 60
CH scan All
Language
Program channel
Input labels
CC
Auto power on
Off
Prog-out stop Off
Ctrl with HDMI
On
Power save
Standard
About
Reset
On
15