Aspect Controls - Panasonic H-37PWD7UY Operating Instructions Manual

ASPECT Controls

The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format
picture.
ASPECT
Press repeatedly to move through the aspect options:
[from the unit]
– +
INPUT MENU VOL ENTER
[During MULTI PIP Operations]
• Picture and Picture, Picture in Picture
• Others
Notes:
• For PC signal input, the mode switches between "NORMAL", "ZOOM" and "FULL" only.
• For a 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p signal input during
"COMPONENT","RGB" and "DVI" input signal, the mode is set to "FULL" mode, and switching is not possible.
• Panasonic AUTO can be selected only during Video signal input.
• The aspect mode is memorized separately for each input terminal (INPUT1, INPUT2, INPUT3 and PC IN).
Mode
4
NORMAL
NORMAL
4
ZOOM
4
FULL
4
JUST
4
Panasonic
For an elongated image
AUTO
4
For a 4:3 image
Note: Do not allow the picture to be displayed in NORMAL mode for an extended period, as this can cause a permanent
after-image to remain on the Plasma Display Panel.
NORMAL
Panasonic AUTO
The aspect mode changes each time the ENTER button is
pressed.
NORMAL
:
: Aspect switching is not possible.
Picture
3
16
ZOOM
3 9
16
FULL
3 9
16
JUST
3 9
16
Panasonic AUTO
3 9
Image is expanded
Changes in
accordance with the
3
Panasonic AUTO
mode setting (see
page 35).
ZOOM FULL
JUST
16 : 9
NORMAL will display a 4:3 picture at its standard 4:3 size.
ZOOM mode magnifies the central section of the picture.
FULL will display the picture at its maximum size but with slight elongation.
JUST mode will display a 4:3 picture at its maximum size but with aspect
correction applied to the center of the screen so that elongation is only
apparent at the left and right edges of the screen. The size of the picture
will depend on the original signal.
The display will automatically become enlarged (depending on the picture
source), allowing you to view the picture at its maximum size.
Notes:
• Panasonic AUTO mode is designed to automatically adjust the aspect
ratio to handle a mix of 16:9 and 4:3 program material. Certain 4:3
program material, such as stock market data screens, may occasionally
cause the image size to change unexpectedly. When viewing such
programs, it is recommended that the ASPECT be set to NORMAL.
• If adjusting the PICTURE V-POS/V-SIZE in Panasonic AUTO with FULL
mode, the adjustment is not memorized. When exiting the mode, the
screen will return to a former adjustment.
N
PICTURE
MULTI
PIP
PICTURE
POS. /SIZE
Explanation
INPUT
SURROUND
VOL
R
SOUND SET UP
ZOOM
SWAP SELECT MOVE
ASPECT
19