Advertisement
Designs:
PUM02 Pressure Transmitters, Class 0.25
Output signal: possible output signals are: Current signal
4 to 20 mA in two-wire circuitry or voltage signal 0 to 10 V
in three-wire circuitry (other outputs available upon request)
Calibration: If desired, these devices can be calibrated up
to a measuring range of 0 to 16 bar at absolute pressure.
Electrical connection: standard DIN EN 175301-803 plug
connector, model A with cable box. Permanently attached
connection cable optional, standard length of 1m
Process connection: If desired, these devices can be
supplied with a flush-mounted stainless-steel diaphragm for
a measuring range up to 0 to 600 bar. This will be neces-
sary for use with viscous or sticky fluids.
Electrical specifications:
Supply voltage:
10 to 30 VDC with current output
14 to 30 VDC with voltage output
Power consump-
tion Max.:
20 mA
voltage output load ≥ 5 kOhm
Output:
current output load ≤ (U-10V) / 0.02 A
Interference
as per EN 61326
emission:
Noise immunity:
as per EN 61326
Protection type:
IP65 EN 60 529 / IEC 529
Electrical
protection types:
incorrect polarity, overvoltage,
and short-circuit protection
Technical details:
Process
G1/2 B male thread, with flush-
connection:
mounted G1 B diaphragm for
measuring range of 0 to 1.6 bar
M16x1.5 female thread for mea-
suring range > 1600 bar
Optional
connections:
G1/4,1/4" NPT and 1/2" NPT
Parts in contact
with media:
stainless steel 1.4571 and 1.4542
(with flush-mounted diaphragm,
1.4571 only)
Max. pressure:
3.5 times the upper range value
for measuring range up to 16 bar
2 times the upper range value
for measuring range to 600 bar
1.5 times the upper range value
for measuring range > 600 bar
1.2 times the upper range value
for measuring range = 1600 bar
1.2 times the upper range value
for measuring range = 2500 bar
PKP Prozessmesstechnik GmbH
Borsigstraße 24 · D-65205 Wiesbaden
S S +49 (0) 6122-7055-0 · T T +49 (0) 6122-7055-50
Email: info@pkp.de · Internet: www.pkp.de
Ordering Code:
order number:
PUM03.
Pressure transmitter, class 0.25
Output signal:
1 = 4 to 20 mA, 2-wire
2 = 0 to 10 V, 3-wire
Calibration:
1 = Relative pressure
2 = Absolute pressure
Electrical connection:
1 = Plug connector
2 = Permanently attached connection cable
Process connection:
1 = G1/2 B
2 = G 1 B (with flush-mounted diaphragm
for measuring range of 0 to 1.6 bar)
3 = M16 X 1.5 female thread (for measuring range > 1600 bar)
4 = Special thread (G1/4, 1/4" NPT, 1/2" NPT)
Design:
1 = Internal diaphragm
2 = Flush-mounted diaphragm
Measuring range:
R = relative
A = absolute
R13 = -0.25 - 0 bar
R14 = -0.4 - 0 bar
R15 = -0.6 - 0 bar
R16 = -1 - 0 bar
R43 = -1 - 1.5 bar
R45 = -1 - 5 bar
R65 = 0 - 0.25 bar
A65 = 0 - 0.25 bar
R66 = 0 - 0.4 bar
A66 = 0 - 0.4 bar
R67 = 0 - 0.6 bar
A67 = 0 - 0.6 bar
R69 = 0 - 1 bar
A69 = 0 - 1 bar
R70 = 0 - 1.6 bar
A70 = 0 - 1.6 bar
R72 = 0 - 2.5 bar
A72 = 0 - 2.5 bar
R73 = 0 - 4 bar
A73 = 0 - 4 bar
R74 = 0 - 6 bar
A74 = 0 - 6 bar
R75 = 0 - 10 bar
A75 = 0 - 10 bar
R76 = 0 - 16 bar
A76 = 0 - 16 bar
R78 = 0 - 25 bar
R79 = 0 - 40 bar
R80 = 0 - 60 bar
R81 = 0 - 100 bar
R82 = 0 - 160 bar
R84 = 0 - 250 bar
R85 = 0 - 315 bar
R86 = 0 - 400 bar
R87 = 0 - 600 bar
R88 = 0 - 1000 bar (without flush-mounted diaphragm)
R89 = 0 - 1600 bar (without flush-mounted diaphragm)
R90 = 0 - 2500 bar (without flush-mounted diaphragm)
Max. media temp.:
-30...+100°C
Max. ambient temp.:
-20...+80°C
Max. storage temp.:
-40...+100°C
Compensated range:
0 to 80°C
Housing:
stainless steel,
European standard no. 1.4301
Weight:
approx. 0.2 kg
Accuracy:
class 0.25
Reproducibility:
< +/- 0.05% f. s.
Response time:
1 ms (between 10%...90% f. s.)
Adjustability:
zero-point and measuring range
up to 10%
PKP Process Instruments Inc.
10 Brent Drive · Hudson, MA 01749
S S +1-978-212-0006 · T T +1-978-568-0060
Email: info@pkp.eu · Internet: www.pkp.eu
2.
1.
2.
1. 1. R76
253
Advertisement
