Installation - Windows - D-Link DWA-582 Quick Install Manual

WARNING: Do NOT plug the adapter into your computer before installing
the drivers. You will be prompted to plug in your adapter during the setup.
Insert the DWA-582 Driver CD into the CD-ROM drive. When the autorun
1
screen appears, click Install and follow the on-screen instructions.
Note: If the CD Autorun function does not automatically start on your computer, go to
Start > Run. In the run box type "D:\autorun.exe" (where D: represents the drive letter
of your CD-ROM drive) and click OK.
2
When the wizard instructs you to turn off your computer and install the PCIe
adapter into your computer, click Next and then Finish. Shut down your
computer and unplug the power.
Once your computer is turned off, unplug the power cord from the computer.
3
Open the case and insert the D-Link adapter into an available PCIe slot. Once
inserted, close the case and insert the power cable into the computer. Turn
on your computer.
Note: Before installing, write down the serial number and hardware revision (e.g.,
A1) in case you need to contact technical support.

Installation - Windows

3