IRiver Mplayer User Manual page 29

Chapter4
Using iriver plus 3
Initializing Disk
1. Connect the product to the USB jack of your
PC using the USB cable and run iriver plus 3.
2. Select [Tools > Portable Device > Initialize Disk]
and click [Start] when the message to confirm
initialization appears.
3. The initialization process is completed and the
product is disconnected from your PC.
28
Note
You need to backup the necessary files before
initialization as formatted files cannot be recovered.
Downloaded from ManualMPlayer.com Manuals
Other Information
Upgrading Firmware
1. After connecting the product to the USB jack of
your PC using the USB cable, run iriver plus 3.
The PC should be connected to internet.
2. Select [Tools > Portable Device > Firmware Upgrade]
and complete the upgrade process following
the on-screen instructions.
Note
Do not disconnect the product from PC while downloading
firmware upgrade file. After the download is completed,
disconnect the cable to activate the firmware upgrade.
During firmware upgrade, the amber LED light will be
turned on.
Do not operate the product in this process.
It may case a malfunction.
If your are using the latest firmware version, the
message to confirm latest version appears.
When connect the product to your PC, if there is latest
firmware, the instruction message appears automatically.