Table of Contents
Advertisement
Available languages
Available languages
How to mount the iCamera KEEP on the wall
1. Place the mounting bracket against the wall. Mark
screw hole positions and drill two holes into the
wall at these locations. Leave at least 4.5 inch /
110mm on top and 1.25 inch / 30mm of open
space on each side to allow the iCamera KEEP to
move freely.
2. For stone, brick and drywall, insert a wall anchor (included) into each hole. Do not use wall
anchors if wall is not stone, brick, or drywall. Screw the longer screw into the existing holes
or wall anchors. Leave each screw exposed 0.21 inch / 5.0mm out from the wall.
3. Ensure the power cable is plugged in and exits through the base's opening space. Use three
short screws to secure the iCamera KEEP to the bracket.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the iCamera KEEP and is the answer not in the manual?
Questions and answers