Task Force 26153 Operator's Manual page 5

ASSEMBLY INSTRUCTIONS
ASSEMBLING THE HANDLE:
NOTE: Do not completely tighten bolts until assembly is complete.
1. Insert the two center handle pieces (2) into the left and right side of the top handle (1) and secure with two
(6) , flat washer (7) and
Carriage Bolts
2. Connect the right lower handle (4) with the left lower handle (3) and secure with two
washer (7) and Locknuts
3. Attach the top handle subassembly previously assembled, to the lower handle subassembly using four
(6),flat washer (7) and
Carriage Bolts
4. Tighten all the locknuts on the joints of the handle assembly.
Assemble the handle less than 15 minutes.
Locknuts
(8) provided. (Fig.3)
Locknuts ( 8) provided. (Fig.4)
Fig.2
Fig.3
( 8) provided. (Fig.2)
5
Carriage Bolts(6), flat
Fig.4