Sony DSC-H20 Service Manual page 16

HELP05:
The Method of Attachment of FL-192 Flexible Board
1 Apply the fold habit to the FL-192 flexible board.
Reinforcement Plate
2 Pass the FL-192 flexible board through the space
of the ST base assy.
3 Fix three holes of plunger solenoid into bosses of
the ST base assy.
ST Base Assy
DSC-H20_L2
3 Match the FL-192 flexible board to two bosses
4 Assemble the flash unit to the ST base assy.
5 Hang the claw in three places, and attach the ST
6 Tighten up a screw.
Bosses
of the ST base assy and put it.
case (upper) assy to the ST base assy.
Claw
Screw
Bosses
ST Case (Upper) Assy
Claw
HELP